Loading ...
Loading ...
Loading ...
a
a
a
a
a
a
10
Technical Data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approx. 51 kg
Max. capacity 8 kg
Condensate container 4.0 l
Connection voltage 220-240 V
Connected load 1000 W
Fuse protection 10 A
Ambient temperature 5 - 35°C
Product number Production number Inside of door
The rating plate can be found on the back of the dryer.
Power consumption when switched off 0.10 W
Power consumption when ready for use (left-on mode) 1.00 W
ʠ
Drum interior light (depending on model): The drum lights up after the door is opened and after
the programme starts, and switches off automatically.
Consumption values table
Programme
Spin speed which
is used for spinning
the laundry
Duration** Energy consumption**
Cottons 8 kg 4 kg 8 kg 4 kg
Cupboard dry* 1400 rpm 179 min 111 min 1.57kWh 0.93 kWh
1000 rpm 203 min 122 min 1.80 kWh 1.04 kWh
800 rpm 227 min 143 min 2.04 kWh 1.25 kWh
|üIron dry*
1400 rpm 125 min 75 min 1.10 kWh 0.66 kWh
1000 rpm 150 min 90 min 1.36 kWh 0.82 kWh
800 rpm 176 min 106 min 1.64 kWh 0.98 kWh
Synthetics 3.5 kg 3.5 kg
Cupboard dry* 800 rpm 55 min 0.51 kWh
600 rpm 71 min 0.66 kWh
* Programme setting for testing in accordance with the applicable EN61121 standard.
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric,
the degree of dryness that has been set and the amount of laundry being loaded.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with ) is suitable for drying normal, wet cotton laundry and is most efficient in terms of
its combined energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme Load
Energy
consumption
Programme duration
Cottons Cupboard dry
8 kg/4 kg 1.80 kWh/1.04 kWh 203 min/122 min
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories (order from the after-sales service using the order number, depending on the model)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space.
The dryer must be fastened to the washing machine using this connection set.
WTZ 11400: with pull-out worktop.
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
WTZ
20410
WTZ
20500
11
Normal noises
During drying, the compressor and the pump generate some noise which is entirely normal.
The compressor in the dryer may occasionally generate a humming
noise. The volume and pitch of this may vary
depending on the selected
programmes and the progress of the drying.
The compressor in the dryer is ventilated from time to time, which
creates a whirring sound.
The automatic cleaning process causes
a clicking noise.
The process of pumping the condensation into the condensate con-
tainer generates pumping noises.
What to do if ...
ʠ
The Inicio/Stop (Start/Pause) indicator light does
not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and indicator lights
(depending on model) go out and the
Inicio/Stop (Start/Pause) indicator light flashes.
Energy-saving mode is activated a see the separate Energy-saving
mode instructions.
ʠ
The display panel switches off. The appliance goes into the sleep mode after activating diferida
(finished in) option a page 5.
ʠ
The Í(Condensate container) indicator light
flashes.
Empty the condensate container apage 4.
Press the Inicio/Stop (Start/Pause) button to reset the displayed
indication and then press the Inicio/Stop (Start/Pause) button
again to restart the appliance if necessary.
Is the condensation drain installed? a Condensation drain hose
blocked a check and clean the hose. Stopper in the condensate
container? a separate Instructions for condensation drain.
Is the filter in the condensate container dirty? a Clean the filter in the
condensate container aCare and cleaning, Page 8.
Residual water in the condensate container
despite the dryer being connected to the
condensation drain.
Not a fault. If the condensation drain is installed, residual water
remains in the condensate container due to the dryer's self-cleaning
function.
Turn the programme selector to Off and remove
the mains plug from the socket.
ʠ
pa
ʠ
ʠ
ʠ
a
ʠ
ʠ
ʠ
a
ʠ
ʠ
a
a
aa
a
ʠ
a
a
ʠ
ʠ
a
ʠ
a
a
a
a
a
a
a
a
a
a
aa
a
a
a
a
Loading ...
Loading ...