Loading ...
Loading ...
Loading ...
3332
LOADING THE DISHWASHER
Places the dishes into the dishwasher properly is the best for energy consumption,
washing and drying performance.
• Load round and deep items, such as pots with long handles, pot lids, plates,
salad plates, and cutlery sets, into the lower basket.
• The upper basket is designed for dessert plates, salad bowls, cups, and glasses.
• When placing long stem glasses and goblets, lean them against the basket
edge, rack, or glass supporter wire and not against other items. Do not lean
long glasses against one another as they cannot remain steady and may receive
damage. It is better to arrange the thin narrow parts into the middle sections of
baskets.
• Place spoons among the other cutlery sets in order to prevent them from sticking
to one another. Use the cutlery grid in order to obtain the best result. To avoid
any possible injuries, always place such long-handle and sharp-pointed
dishes as serving fork, bread knife, etc. with their sharp points facing down or
horizontally on the baskets.
WARNING: Place dishes into the dishwasher in a way that they will not
prevent the upper and lower spray arms from spinning.
NOTE: Place all large and very dirty items in the lower rack.
WARNING: Do not put items that can absorb water (sponges, household
cloths, etc.) into the dishwasher.
NOTE: Place all containers such as cups, glasses, and pots into the dishwasher with
the opening facing downwards (so that no water can collect).
NOTE: Dishes and cutlery should not be placed above each other.
FILLING THE RINSE-AID AND SETTING
1. To fill the rinse aid compartment, open the rinse-aid compartment cap.
2. Fill the compartment with rinse-aid to the MAX level and then close the cap. Be
careful not to overfill the rinse aid compartment and wipe up any spills.
3. Close the cap until it click. Otherwise, water can enter the rinse-aid reservoir
during a program.
In order to change the rinse-aid setting, follow the below steps before turning on the
dishwasher:
1. Open the door of the dishwasher,
2. Press and hold “Start/Pause + On/Off” key for 3 seconds,
3. The dishwasher gives an audible warning when it is ON,
4. Then, press and hold “Program Selection + Cancel” key until “rA” is represented
on the display, the dishwasher will display the last setting,
5. The amount of rinse aid is adjusted by pressing “Program Selection + Cancel”
key.
6. After the adjustment, turn off (by pressing Start/Pause + On/Off key) the
dishwasher to save the selected rinse-aid amount.
NOTE: If the dishes are not drying properly or are spotted, increase the level. If blue
stains form on the dishes, decrease the level.
USA-CAN - 16
5.8.Rinse - aid Usage
Rinse-aid makes dishes sparkle and helps
them to dry without spotting. Rinse-aid is
required for stain-free utensils and clear
glasses.
(!)Use only rinse-aid for domestic
dishwashers.
(!)Filling the rinse aid reservoir with
detergent will damage the reservoir. Only
pour rinse aid formulated for residential
dishwashers into the reservoir.
NOTE: When the Rinse Aid indicator
lights up, the rinse aid reservoir contains
sucient rinse aid for 2 - 3 programs only.
When using “Tab” detergents rinse aid is
not needed.
5.9 Filling The Rinse-aid and Setting
1) To ll the rinse aid compartment, open
the rinse-aid compartment cap (Fig.A)
2) Fill the compartment with rinse aid to the
MAX level and then close the cap.Be
careful not to overll the rinse aid
compartment and wipe up any spills.
3) Close the cap until it click. Otherwise
water can enter the rinse aid reservoir
during a program.
In order to change the rinse aid level,
follow the below steps before turning on
the machine
In order to add rinse aid to the machine,
1. Open the door of the machine,
2. Press and hold “Start/Pause + On/O”
key for 3 seconds,
3. The machine gives an audible warning
when it is ON,
4. Then, press and hold “Program Selection
+ Cancel” key until “rA” is represented on
the display, the machine will display the last
setting,
5. The amount of rinse aid is adjusted by
pressing “Program Selection + Cancel” key,
6. After the adjustment, turn o (by pressing
Start/Pause + On/O key) the machine to
save the selected rinse aid amount.
NOTE: If the dishes are not drying
properly or are spotted, increase the level If
blue stains form on your dishes, decrease
the level.
Level Brightener Dose Indicator
1 Rinse - aid not
dispensed
r1 is shown on the
display.
2 1 dose is
dispensed
r2 is shown on the
display
3 2 doses are
dispensed
r3 is shown on the
display.
4 3 doses are
dispensed
r4 is shown on the
display.
5 4 doses are
dispensed
r5 is shown on the
display.
Level Brightener Dose Indicator
1 Rinse - aid not dispensed r1 is shown on the display
2 1 dose is dispensed r2 is shown on the display
3 2 doses are dispensed r3 is shown on the display
4 3 doses are dispensed r4 is shown on the display
5 4 doses are dispensed r5 is shown on the display
OPERATION OPERATION
Rinse-Aid
Loading the Dishwasher
WARNING
WARNING
Loading ...
Loading ...
Loading ...