Loading ...
Loading ...
Loading ...
TO ASSEMBLE
WARNING:
• Do not activate or plug the product into an electrical outlet until the product is
completely assembled.
• The Blades of the product are very sharp; handle with care.
1. Ensure the product is unplugged from the electrical outlet.
2. Place the Motor Housing on a flat, stable surface.
3. Wash and dry the Pitcher.
4. Ensure the Plastic Ring is attached around the Spin Base.
5. Insert the Blades and Spin Base into the bottom of the Pitcher and turn
clockwise (follow the arrows inscribed on the bottom of the Spin Base)
until the plastic latches of the Pitcher bottom and the Spin Base lock into
place.
6. Place the Pitcher onto the Motor Housing ensure the Motor Drive
Coupling and the fittings located on top of the Motor Housing are aligned.
7. Twist the Pitcher counterclockwise until the plastic latches of the Pitcher
and the Motor Housing lock into place.
NOTE: Ensure the arrow below the Pitcher handle is aligned with the
arrow below the plastic latch of the Motor Housing.
8. Place the Plastic Lid on top of the Pitcher and secure it into position.
NOTE: The Pitcher handle has a slide release mechanism to hold the
Plastic Lid to the Pitcher. Make sure the Plastic Lid is always securely in
place on top of the Pitcher before operating the product.
OPERATION
1. Wash the ingredients you want to blend and cut them into pieces
small enough to fit into the Plastic Lid Feeding Hole.
2. Once cleaned and cut, add the ingredients into the blender
through the Plastic Lid Feeding Hole. NOTE: The Pitcher has a
six cup (48 oz. / 1.5 liter) capacity. Do not overload the Pitcher
with ingredients.
3. After filling the Pitcher with ingredients, secure the Plastic Lid
with Feeding Hole into position. Plug the product into a
standard 120-volt AC electrical outlet.
Loading ...
Loading ...
Loading ...