Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2 OVERVIEW
Figure 1 - 17.
1
Trigger
2
Lock-out button
3
Upper shaft
4
Auxiliary handle
5
Middle shaft
6
Lower shaft
7
Motor housing
8
Edge guide
9
Trimmer head
10
Guard
11
Release button
12
Positioning hole
13
Knob
14
Battery release button
15
Cut-off blade
16
Tab
17
Spool cover
18
Spool
19
Spool housing
20
Eyelet
21
Anchor hole
22
Guide slot
A
Direction of rotation
B
Best cutting area
C
Dangerous cutting area
2 SAFETY
WARNING
Make sure that you follow all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
3.2 ATTACH THE EDGE GUIDE
Figure 2.
NOTE
The edge guide can limit the cutting range of the machine
and decrease the risk of the damage caused by the rotating
cutting line.
1. Push the edge guide onto the trimmer head until it
engages in the slots.
2. The edge guide can be flipped up for storage.
3.3 ATTACH THE GUARD
Figure 3.
WARNING
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a Phillips
head screwdriver (not included).
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw holes
on the trimmer head.
4. Tighten the screws.
3.4 ASSEMBLE THE SHAFT
Figure 4.
WARNING
Never install, remove, or adjust any part of a machine while
the machine is plugged in or running.
4
English
EN
Loading ...
Loading ...
Loading ...