SLBKBLU28 User Manual

Loading ...

1a. Adjust the Brake Cable

The brake cable must be adjusted to ensure that the

brakes are close as possible to the wheel rim when no

pressure is applied to the brake lever but still allowing

freedom of wheel to rotate.

Using a suitable spanner or socket, loosen the cable

anchor nut until the brake inner wire/or cable is free to

move.

Pull the brake cable until the brake pads are approximately

3 to 4 mm from the wheel rim. Retighten the cable anchor

nut while holding the brake cable position.

www.SereneLifeHome.com 9

SAFETY CHECKLIST

Before Riding

You should perfonn the following checks before riding your bike to ensure it is safe to use and operating correctly.

1. Is the saddle Secure?

While standing next to the bike, try and move the saddle from side to side.

If the saddle moves you should retighten the seat post bolt or the saddle clamp bolts.

2. Are the Front and Rear Tires Inated Correctly?

Squeeze the sides of the front and rear tires. If they are soft they will need inating.

Re-inate to the pressure indicated on the sides of the tires using approved bicycle pump.

3. Are the Pedals Tight?

Using the supplied multi-tool, ensure both the left and right pedals are fully tight.

Remember that the threaded shafts of the left and right pedals tighten in dierent directions.

Loading ...

SereneLife SLBKBLU28 12'' High-End Kid's Bicycle with 2 Hand Brakes, Reflectors, Bell, Tools, Training Wheels and Kickstand