Loading ...
Loading ...
Loading ...
7
9. Once the food is cooked, set the temperature control to “Thermostat” to keep the food warm.
10. After use turn the thermostat to OFF, heat level “0”.
11. Remove the plug from the mains socket.
12. Allow the appliance to cool down before removing the temperature regulator from the
appliance, as the temperature sensor will be hot.
13. Clean the appliance according to the instruction in the Cleaning and Care section.
Note: Frozen food should always be defrosted before it is cooked.
Do not use metal utensils on the grill as this will damage the non-stick coating. Do not cut food
directly on the grill.
Settings Table
Heating levels Temperature °C Food type
1 & 2 100 °C Roasted food, meat, etc.
3 & 4 150- 200 °C Pancakes, scrambled eggs, bacon, etc.
5 240 °C Grilled foods, pizza, etc.
Troubleshooting
Questions Answers
The lamp has gone off.
The lamp turns on and off automatically as the thermostat regulates the
required temperature.
The appliance makes
a noise.
The heating element and grill plate may emit a sound during use. This
is normal.
Cleaning & Care:
1. Always clean your appliance after each use to prevent a build-up of baked-on foods.
2. Set the temperature regulator to heat level “0” and pull the plug out of the mains socket. Allow
the appliance to cool down before cleaning.
3. The grill plate is easier to clean when slightly warm. Wipe the grill plate with a soft dry cloth to
remove food residue.
4. Wash the drip tray in warm soapy water.
Note: For baked on food residue carefully squeeze some warm water mixed with detergent over the
food residue then clean with a non-abrasive scouring pad. For particularly stubborn residues, with
caution, turn the appliance back on for a short while to soften further, before wiping away.
Note: To avoid damaging the non-stick coating do not use any chemicals, aggressive detergents,
scourers, brushes with metal or nylon bristles or sharp objects such as knives or spatulas for cleaning
the appliance.
1. DO NOT place the grill plate or temperature control in water.
2. Take care to avoid water entering the appliance.
3. Clean the temperature control with a soft dry cloth when cold.
4. Ensure the appliance is completely clean and dry before reusing.
5. Ensure the appliance is completely dry before storing.
Loading ...