4. Step on the scale barefoot, with your feet aligned on the electrodes (metal strips)
on both sides of the platform.
Note: You must be barefoot in order for the scale to read your body analysis
measurements.
5. Your current weight will be displayed for a few seconds and the speaker will read
out your weight reading as it appears on screen once if voice mode is turned on
and will not read out if voice mode is turned off .
6. Next, the display will show your body fat percentage and the speaker will read
out your body fat reading as it appears on screen once if voice mode is turned
on
and will not read out if voice mode is turned off .
7. Then, the display shows your body water percentage and the speaker will read
out your body water reading as it appears on screen once if voice mode is
turned on
and will not read out if voice mode is turned off .
8. Next, the display shows your bone mass value and the speaker will read out
your bone mass reading as it appears on screen once if voice mode is turned on
and will not read out if voice mode is turned off .
9. Next, the display shows your Body Mass Index (BMI) score and the speaker will
read out your BMI reading as it appears on screen once if voice mode is turned
on
and will not read out if voice mode is turned off .
10. Finally, the display will repeat your current weight, body fat, body water, bone
mass and BMI once. Then it will automatically switch off.
If an error “Err” message appears:
The scale must be on a hard, flat surface, not carpet. You must stand on
the scale barefoot, with no shoes or socks, and also ensure your feet are
aligned on the stainless steel electrodes on the platform.
If your feet are not aligned correctly on the stainless steel electrodes, or if
you are wearing shoes, socks or stockings, the scale will display “- - - -”
and “Err”.
The “Err” message will also be displayed if the weight on the
scale exceeds the scales capacity.
You might be standing on the scale before “0.0” is displayed. When the
scale is switched off, quickly and firmly tap the center of the scale platform
with foot to activate. Wait a few seconds, then “0.0” will be displayed. You
should then stand on the scale –never stand on the scale before “0.0” is
displayed. The “Err” message will also be displayed if the weight on the
scale exceeds the scales capacity.
Low Battery
If the battery charge is low, the scale will show a “Lo”display automatically.
Replace the batteries with new batteries of the correct size and grade to use the
scale.
Battery Notes:
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Replace all batteries of a set at the same time.
• Do not mix old and new batteries. Do not mix alkaline and standard (carbon-zinc)
batteries. Do not use rechargeable (Ni-Cad, Ni-MH, etc.) batteries.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove screw to open battery cover and remove old batteries. Remove batteries
from scale that is not to be used for an extended period of time.
• “Lo” will appear on the display if battery is low and needs to be replaced.
Remove and replace batteries.
When using electrical appliances, especially when children are present, basic safety
instructions should always be followed, including the following:
• Polythene bags over product or package may be dangerous. To avoid danger of
suffocation, keep this wrapper away from babies and children. This bag is not a
toy.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
LIMITED TEN YEAR WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
In New Zealand our goods come with a guarantee that cannot be excluded under
the Consumer Guarantee Act 1993.
Conair Australia Pty Ltd. will repair or replace (at our option, and excludes batter-
ies) your bathroom scale free of charge for one hundred and twenty months from
the date of purchase if the appliance is defective in workmanship or materials
under normal home use.
This warranty covers working parts that affect the function of the appliance. It
does not cover cosmetic deterioration caused by fair wear and tear, damage
caused by accident, misuse, shipment or other ordinary household use. Conair
shall not be responsible for any incidental, consequential or special damages.
This warranty is available to consumers only. You are a consumer if you are the
owner of a WW Scale by Conair that was purchased at a retail outlet for personal,
family or household use. This warranty is not available to retailers or other com-
merical to sit on one line.
This warranty is an additional benefit and does not affect your legal rights. To
obtain service under this warranty, please read the Warranty Leaflet included or
contact Conair Customer Service at aus_info@conair.com.
While a scale can be a useful tool on your wellness journey, it’s not a complete
program. Come to a WW Workshop www.ww.com/au/workshop or join online to
learn how to build healthy eating habits, shift your mindset, become more active
and understand how to better manage your weight.
In Australia: 13 19 97 or www.ww.com/au
In New Zealand: 0800 009 009 or www.ww.com/nz
WW195A
WW BODY ANALYSIS SMART SCALE
Congratulations! By purchasing this WW Scale, you’ve made a positive step in your
wellness journey. To get the greatest benefit from your purchase, please read this
entire brochure before using your scale.
Age
5. Age will flash in the display window – press UP or DOWN arrows to select age.
Once OK press SET.
Gender
6. Male or female gender icon will flash in the display window – press UP or DOWN
arrows to select gender. Once OK press SET.
Your personal data has now been entered and stored into the bathroom scale. The
scale will now re-display all of the saved data for a few seconds, and then “0.0”
will appear.
If you make a mistake and need to change the data entered, simply press SET, and
repeat process 3-6 again. If you would like to change the data previously input (i.e.
your age changes), simply follow the instructions 1-6 again. The new information
will override any data previously stored.
NOTE: If at any time during the personal data entry process a button is not pressed
within 15 seconds, the scale will automatically switch off.
Body Analysis
NOTE:
1. Place the scale on a hard level floor.
The surface must be flat and level for the scale to operate correctly.
NOTE: THE SCALE SHOULD NEVER BE USED ON CARPET.
2. Press on the scale with one of your feet and take off your foot once it turns
on before a weight reading appears, at the same time the speaker will say
“HELLO” if the voice mode is turned on, and will not read out if voice mode is
turned off . Then “0.00” and voice icon ( voice on
, or voice off ) appear.
3. Press UP and DOWN button repeatedly until your user number shows on the
display. Stored data for your user number appears, then the scale displays
“0.00”.
WW is the registered trademark of WW International,
Inc. and is used under license by Conair Australia Pty Ltd.
©2020 WW International, Inc. All rights reserved.
WW ASSURANCE:
Questions? Comments? Call Conair Customer Service.
Conair Australia Pty. Ltd.
Suite 101, 18 Rodborough Rd
Frenchs Forest NSW 2086 Australia
Australia: 1800 650 263
Conair New Zealand Limited
PO BOX 251159
Pakuranga, Auckland 1706 New Zealand
New Zealand: 0800 266 247
For advice & tips on your new WW scale email us on:
aus_info@conair.com
IB-
Note: To set the weight unit for measuring in pounds (lb) or kilograms (kg),
press on the scale with one of your feet and once it turns on, take off your
foot before a weight reading appears, and then you will see "0.0"(lb) or
"0.00"(kg) appears , press the unit switch on the base of the scale to set the
unit (the display will instantly show the unit with your setting).
You could also set the unit when a weight reading is stable during weight
only mode, and the reading will instantly adjust with your unit setting.
Customising Your Body Analysis Monitor
This scale can be customised for up to 6 users. While the customisation process is
not difficult, it may be easiest to read all the instructions first to familiarise yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: SET, UP and DOWN arrows
To set your user data
1. When the scale is switched off, press on the scale with one of your feet and
take off your foot once it turns on before a weight reading appears, at the same
time the speaker will say “HELLO” if the voice mode is turned on, and will not
read out if voice mode is turned off . Then “0.00” and voice icon ( voice on
,
or voice off
) appear.
, or voice off ) appear.
2. Once “0.0” is displayed, press the SET button.
User Number
3. P-01 will flash in the display window – press UP or DOWN arrows to select user
number (P-01 to P-06). Once OK press SET.
Height
4. The inch or cm symbol will flash in the display window – press UP or DOWN
arrows to adjust height (if switch is set to lb, default is height in inches; if switch
is set to measure in pounds, the height will display in feet and inches. If it is set
to measure in kgs, the height will display in cm. Press SET to accept the height.
Loading ...
Loading ...
Loading ...
