Loading ...
Loading ...
Loading ...
Observetheovenburnerflametodetermineif itisright.
Itshouldbesteadywithablueconeapproximately1"
andshouldnotextendoutovertheedgesofbaffle.For
LPGas,thiswillmostlikelyoccurwhentheair
adjustmentshutteriscompletelyopen(seefigure15).
TurnOvenTemperatureto300%andallowovento cycle
onandoff.
Model and Serial Number Location
Theserialplateislocatedontheleftsideinnertrimof
theovenforthemodelwith 11/2ovencavityandonthe
lowerovenframeforthemodelwith2ovencavities.
Whenorderingpartsforormakinginquiresaboutyour
walloven,alwaysbesuretoincludethemodeland
serialnumbersandalotnumberorletterfromtheserial
plateofyourappliance.
Yourserialplatealsotellsyoutheratingoftheburners,
thetypeoffuelandthepressurethewallovenwas
adjustedforwhenit leftthefactory.
Stepping,leaningorsitting onthe
ovendoorordrawercanresultin seriousinjuries
andalsocausedamageto theappliance,
Besureto keepapplianceclearof combustible
materials,gasolineandotherflammablevaporsand
liquids.
Figure15
Toreplacebroilerdrawerorlowerbottom,reversesteps
takenforremoval.Replaceovenrackand/orbroilerpan.
12. Check Operation
Refer to the Use and Care Guide packaged with the wall
oven for operating instructions and for care and cleaning
of your appliance.
Do not touch the oven burner. They may be hot enough
to cause burns.
,
Check the Igniters (some models)
Operation of electric igniters should be checked after
oven and supply line connectors have been carefully
checked for leaks and oven has been connected to
electric power.
Before You Call for Service
Read the Avoid Service Checklist and operating and
cleaning instructions in your Useand Care Guide.
Check to make sure the house fuse or circuit breaker for
your wall oven is not blown or open.
Care, Cleaning and Maintenance for Wall
Ovens
If removing the wall oven is necessary for cleaning or
maintenance, shut off gas supply. Disconnect the gas
and electric supply. Remove the installation screws from
front frame and lower trim. Pull out only as far as
necessary to disconnect the electric supply line. After
disconnecting the gas and electric supply, finish
removing the unit for servicing and cleaning. Reinstall in
reverse order making sure to level the appliance; check
gas connection for leaks.
,
Oven Igniter System
Close the door and turn the Oven Temperature to
300%. In approximately 60 seconds, the burner
should ignite and stay on until oven reaches 300%.
Burner should then cycle on and off to maintain an
average temperature of approximately 300%.
When All Hookups are Complete
Make sure all controls and programmable timer are left in
the OFFposition.
Resetall controls to the "OFF" position after using a
programmable timing operation.
Loading ...
Loading ...
Loading ...