Loading ...
Loading ...
Loading ...
31English
NOISE/SOUND
Why don’t I hear a
sound? Why can’t I hear
my baby cry?
The volume of the parent unit may be set too low or may be switched o.
Press the top part on the control button to increase the volume level.
Perhaps the parent unit is muted, unmute the device by pressing the top
part of the control button and adjust the volume.
The sensitivity is set too low, adjust the sensitivity in the parent unit's menu
to a higher level.
The baby unit may be too far away from your baby. Make sure the baby unit
is not further than 1.5 meters/ 5 feet away from your baby for optimal sound
detection. Closer than 1 meter /3.5 feet increases strangulation hazard.
Why does the parent
unit react too quickly to
other sounds than my
baby makes?
The baby unit also picks up other sounds than those of your baby. Move
the baby unit closer to the baby (but observe the minimum distance of 1
meter/ 3.5 feet).
The sensitivity level may be set too high. When your baby makes soft
sounds, the sensitivity has to be higher. However, the louder your baby
sounds, the lower the sensitivity level can be set. You can change the
sensitivity of your baby monitor on the parent unit's menu.
Why does the parent
unit make a buzzing
sound?
Interference may occur when the parent unit is out of range of the baby
unit. Interference may also occur if there are too many walls or ceilings
between the parent unit and the baby unit or when other 2.4 GHz wireless
devices are switched on (e.g. microwave, Wi-Fi router).
Put the parent unit in a dierent place, closer to the baby unit, or switch o
other wireless devices.
If this answer does not help you, check the other FAQ on " Why does the
parent unit and/or baby unit produce a high-pitched noise?"
How long will the lullaby
song be played by the
baby unit?
Once you select a lullaby, it will be continuously repeated for approximately
15 minutes. In case you want to play all songs that are available, select the
last option in the lullaby list.
How can I increase the
volume of the lullaby?
You can adjust the volume of the lullaby on the parent unit, not on the baby
unit. Press the lullaby button on the parent unit to open the lullaby menu
and adjust the volume.
OPERATING TIME / RANGE
Question Answer
Why does my baby
monitor manage a much
smaller distance than
specied in this user
manual?
The specied operating range of 300 meters /985 feet is only valid
outdoors in open air and in the line of sight. Depending on the surroundings
and other disturbing factors, the operating range may be smaller (see also
table in chapter on positioning of parent and baby unit).
Inside your house, the operating range is up to 50 meters/165 feet, which is
also limited by the number and type of walls and/or ceilings between the
parent unit and the baby unit.
Loading ...
Loading ...
Loading ...