Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
10
2. Assembly method of exhaust pipe
• Connect the exhaust pipe assembly with the
round joint (as shown in Fig. 6).
• Fix the circular end of the connected exhaust
pipe assembly at the air outlet of the machine
according to the direction shown in Fig. 7.
• Connect one end of the oblate joint of the
connected exhaust pipe assembly with the
window sealing plate.
• Install the seal to the nearest window.
Make sure there is no obstacle within 50 cm
outside the window to ensure smooth exhaust.
Note:
The length of the exhaust duct is between
60cm and 170cm (including the adapter).
We suggest using the minimum length, which
can save energy for you.
• The length of the exhaust duct is specially designed according to the speci-
cations of the air conditioner. Do not use exhaust pipes of dierent lengths or
materials, which may cause failure.
Note: the above exhaust pipe and installation method are standard
conguration of the company, subject to the actual object.
3. Installation of window sealing plate
Window sealing panels are designed to meet most standards for horizontal
or vertical windows. The steps are as follows:
1. Measure the window size;
2. Adjust the length of the window sealing plate to adapt to the size of the
window;
3. After the length of the window sealing plate is determined, the length size is
xed with screws;
Figure 6
Figure 7
Loading ...
Loading ...
Loading ...