Loading ...
Loading ...
Loading ...
SECTION 6: CONTROLS
Drive Clutcl_
Control _ \
Rec
Sta'_t Handle
A
Blade Control Handle
Recoil Starter
B
Figure 8
BLADECONTROLHANDLE
_hb WARNING: This control mechanism is a safety device. Never attempt to bypass its operations.
The blade control handle is located on the upper handle of the mower. See Figure 8. The blade control handle must
be depressed in order to operate the unit. Release the blade control handle to stop the engine and blade.
WARNING: The blade will be rotating whenever the engine is running.
OPTIONAL THROTTLE CONTROLS
Your unit will be equipped with one of three optional throttle controls. Follow the instructions which pertain to your unit.
• The throttle control is located on the left side of the upper handle. It is used to regulate engine speed.
• The throttle control is located on the engine. It is used to regulate engine speed.
• The engine is equipped with a constant speed throttle which is set at full throttle for maximum engine and
cutting performance.
WARNING: The throttle control can not be used to stop the engine. If your throttle control is located on
the engine, do not adjust the throttle control with the engine running.
RECOIL STARTER
The recoil starter handle is attached to the handle. See Figure 8. Stand behind the unit in the operating position to
start the unit.
DRIVECLUTCHCONTROL
Squeeze the drive clutch control against the upper handle to engage drive. Release the drive clutch control to slow
down when negotiating an obstacle, making a turn or stopping. There are two different styles of drive clutch controls
that are available. See Figure 8.
10
Loading ...
Loading ...
Loading ...