Loading ...
Loading ...
Loading ...
BISSELL.com 9
Maintaining the Brush Roll
Go to support.BISSELL.com for tips on maintaining and replacing your vacuum.
1. Turn the machine OFF and
press the foot release button
to disconnect the motorized
cleaning foot.
2. Use a flathead screwdriver
or coin to twist the bottom
screws counter-clockwise and
release the brush roll side
covers.
3. After turning the screws
counter-clockwise pull the
brush roll cover toward you
and remove it from the floor
nozzle.
4. Remove the brush roll. Push
the end of the brush dowel to
the left and lift the brush roll
out of the foot.
5. After brush roll is removed
clear any debris from the
brush, brush housing, and air
suction channel.
6. After clearing debris, place
the brush roll cover back onto
the floor nozzle.
7. Attach and secure brush
roll cover by using flathead
screwdriver or coin to twist the
screws clockwise.
8. Remove debris from
brushes and rinse under warm
water. Let dry for 24 hours.
Loading ...
Loading ...
Loading ...