Loading ...
Loading ...
Loading ...
1413
is normal. Press the GODIAG PIRT Power Probe power output function switch
forward, positive electricity will be output to the probe circuit. If the vehicle
module or component can work normally, it means that there is a problem with
the vehicle's positive power supply circuit for this module.
Note: If the pressing of the positive output causes a trip and open circuit, it
means that the tool has been overloaded.
The following reasons may explain it: The probe is directly in contact with
GND or the component you are testing is short-circuited.
If the positive output of the product is delivered to a high-current module or
component, it will cause the product to trip. At this time, reconnect the device
and it will function normally.
5.）Socket Module Components Test
If the maintenance technicians or engineers have already known the
principle of control and the module components are connected to the vehicle
normally,they can directly input positive or negative electricity to the socket via
the probe, and they can judge the cause of failure according to the testing result.
6.）Test of Modules Installed in the Vehicles
This product can test modules installed in the vehicles. Engineers can judge
the performance of components based on their own experience and technology.
Let the probe output positive or negative electricity to achieve the purpose of
testing a single component.
Use this product to perform activation tests on the modules or components
installed in the vehicle. Find the positive circuit and connect the probe to the
positive electrode of the circuit. If the green LED lights, the buzzer emits a low-
frequency sound, it means that the GND connection of the module or component
Loading ...
Loading ...
Loading ...