Loading ...
Loading ...
Loading ...
●
Swapping Your World Time and Home
Time
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand Alignment
If the hands are out of alignment even though
the watch is connected with your phone, use
EDIFICE Connected to adjust them.
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to correct hand alignment.
Phone Finder
You can use phone finder to trigger a tone on
the paired phone to help you find it. The tone
is forced to sound even if your phone is in
vibrate mode.
Important!
●
Phone finder will not sound the tone
unless EDIFICE Connected is running
on the phone.
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least two seconds to enter the
Timekeeping Mode.
2.
X
Hold down (D) for at least five seconds.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
ConnectedSearching for phone
3.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Note
●
Connection with your phone is not
possible while the watch’s Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
l
Using the Watch in a Medical
Facility or Aircraft
Configuring Watch Settings
You can use EDIFICE Connected to specify
the interval for acquiring the latest schedule
from your phone, to enable or disable the
watch operation tone, and to configure other
settings.
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
●
Connecting with a Phone
If
e
does not appear on the watch display even
though it is paired with your phone, hold down
(D) for at least two seconds to connect with
your phone.
●
Once the watch and phone are connected,
the connection is maintained.
Important!
●
If you have problems establishing a
connection, it could mean that
EDIFICE Connected is not running on
your phone. On your phone’s home
screen, tap the “EDIFICE Connected”
icon. After the app starts up, hold down
the watch’s (D) button for at least two
seconds.
Unpairing
Unpairing the watch from a phone requires
both EDIFICE Connected and watch
operations.
Note
●
If you are using an iPhone, also delete
the pairing information stored on the
phone.
Operation Guide 5638
9
Loading ...
Loading ...
Loading ...