Loading ...
Loading ...
Loading ...
11
Note: The R Series only features one removable filter located at the top on the backside
of the unit.
Setting the Timer using the control panel or remote control
Programming Start Up –
• Turn on the appliance, choose the mode you want, for example cool, 72°F, high fan speed.
• Turn o the appliance.
• Press the Timer button, the Timer symbol on the screen will display 1-24 hours
• Press several times until the corresponding time is displayed.
• Wait about 5 seconds for the timer to activate, then the Timer indicator will be displayed on
the screen.
• Press the Timer button again to cancel the timer and the Timer symbol will disappear.
Programming Shut O -
• When the appliance is running, press the
button and the screen will display 1-24 hours.
• Press several times until the corresponding time is displayed.
• Wait about 5 seconds for the timer to activate, then the Timer indicator will be displayed on
the screen.
• Press the Timer button again to cancel the timer and the Timer symbol will disappear.
TIPS FOR CORRECT USE
To get the best performance from your appliance, follow these recommendations:
• Close the windows and doors in the room to be air conditioned (Fig. 1). When installing
the appliance semi-permanently, you should leave a door slightly open (as little as 1/2“) to
guarantee correct ventilation.
• Protect the room from direct exposure to the sun by partially closing curtains and/or blinds
to make the appliance much more economical to run (Fig. 2).
• Never rest objects of any kind on the appliance.
• Do not block the air inlet or outlet of the appliance.
• Reduced air flow will result in poor performance and could damage the unit (Fig. 3).
• Make sure there are no heat sources in the room.
• Never use the appliance in very damp rooms (bathroom for example).
Loading ...
Loading ...
Loading ...