Loading ...
Loading ...
Loading ...
97
Installation
ENEN
Carefully screw the hose connector 3 to
the appliance’s gas connector 1 (½”
thread ISO 228-1), placing the seal 2
between them. The hose connector 4 can
also be screwed to the hose connector 3,
depending on the diameter of the gas
hose used. After having tightened the
hose connector(s), push the gas hose 6
onto the hose connector and secure it
with the clamp 5 that is compliant with the
standard in force.
Connection with a steel hose
Make the connection to the gas mains
using a continuous wall steel hose whose
specifications comply with the applicable
standard.
Carefully screw the connector 3 to the gas
connector 1 of the appliance, placing the
seal 2 between them.
Connection with a steel hose with
bayonet fitting
Carry out the connection to the gas mains
using a steel hose with bayonet fitting
compliant with B.S. 669. Apply insulating
material to the thread of the gas hose
connector 4 and then tighten the adapter 3.
Screw the assembly to the movable
connector 1 of the appliance, placing the
seal supplied 2 between them.
Connection using a rubber hose
complying with current standards is
only permitted if the hose can be
inspected along its entire length.
The inside diameter of the hose
must be 8 mm for LPG and 13 mm
for Natural gas and Town gas.
Loading ...
Loading ...
Loading ...