Loading ...
Loading ...
Loading ...
FILL iN DATES
Check Brake Operation _
CheckTire Pressure
Check Operator presence and
T _InterlockSystems
R CheckforLooseFasteners If 1_7 I_
A Sharpe_Replace MowerBlades i4
T Lubr_ationChart t,/
0 Check BatteP/Level
R Clean BattePjandTe_m_els I_
CheckTra_axle Cooling fl_
Adjust Blade Belt(s) T_sion II_s
AdjustMotionDriveBelt(s)Tension l_s
Check_in. Oilu,_,l i/
Q1ange Engine Oil 1_12:.
E C_n Air Filter 1#/2
N CleanAirScreen I_
G Inspect Muffler/Spark Armster ql_
Replace Oil Filter (if equipped) ll_T.2
EN CteanEngineCoolingFins !11_2
ReplaceSpark Plug It_ V'
ReplaceAir Filterpaper Cartridge _z
Replace Fuel Filter
t - C_nge n_xe ot;en_._eerCem_r_unde(a heavyIo_1o¢inhigharn_entter_eratureL 5. ffequipped_ _ustaUe syster_.
2. S_r_ n_rDo_enwhenopera_ Jn_,/_ _ty co_i_o_s. 6 oNo(requ_d #eqt_ppedwhhrn_en_ce- fTeeb_tte_.
3- If _qtippedwithc4filter,_ge _ _vmy50 houn_ 7-T_tm_ _t a_e i_w_bo_to 35ft.-I_, maxi._um.
4- Repl,_:e_de_ rn_ o_n whenrnow;n_insar_ sdl. Dono(ovm'_'_en.
GENERAL RECOMMENDATIONS
The warranty on thistractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodicallyto properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
(_ Sr
Zerk t'.-7' Zerk
(_Front Wheel
Bearing
Zerk
(_Engine ,.
(_General Purpose Grease
ng Zerk
i
_)Refer to Maintenance =Engine" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
beerings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant
sparingly.
19
Loading ...
Loading ...
Loading ...