Loading ...
Loading ...
Loading ...
7
Operation panel and display area
1. Remove the cover of the water reservoir and pour potable water into water reservoir.
And be sure to keep water level below the max. level with FULL mark displayed in following
picture. Then move back the cover at once to avoid foreign matter enter.
Cover for the
water reservoir
Warning: Do not pour the water into the internal water tank located underneath
the ice basket. This tank is not big enough andwill effect the ice making
performance.
2. When you plug the unit, the power symbol< > will flash. Press the <ON/OFF>button,
the unit will start making ice cube, ice making symbol< > will keep running. The left up
corner of display area will show the ambient temp,i.e:80℉means the ambient temp is 80
℉.After several mins, this area will show flash number, the ice making will countdown,i.e:10M
means the ice making will finish 10 mins later.
3. When ice maker harvest,symbol< > flash, the water will flow from top water reservoir to
bottom water tank through solenoid valve,the symbol < > will be on ,when the water in
the bottom water tank is full,the symbol < > will be off,then the next ice making cycle
start again.When there is no water in the water reservoir, the symbol < > will keepon.
Turn off the unit and fill water again, then restart the unit to make ice cube.Or fill water
directly and wait 20mins,the unit will restart .
Remark:The ice making cycle lasts about 13 to 25 minutes, depending on the ambient
temperature. And for the first time, according to the initial water temperature, ice-making last time
USING YOUR ICE MAKER
OPERATION AREA
DISPLAY
AREA
TIMER ON/OFF -+
Loading ...
Loading ...
Loading ...