Tabletop Water Fountain
SLTWF30 QUICK GUIDE
SETUP INSTRUCTIONS:
1. Connect the pump to the water-pipe connector
located at the bottom of the fountain .
2. Ensure the power switch on the pump is turned ON
and position into the water fountain bowl.
3. Add water to the bowl and connect the power cable.
TROUBLESHOOTING:
1. If your fountain pump fails to operate please check the following:
• Make sure the pump is plugged into the wall outlet/socket properly.
• Check the water level in the fountain. Running the pump without sucient water can damage the pump.
• Check the power switch of the ow control on the pump. See picture 2 above.
• Check the pump outlet nozzle and the water tube for dirt and debris. Clean if necessary.
• Make sure the pump is connected to the water tube tightly. Check the fountain tubing for kinks and obstructions
• The pump may be "air locked", Power the pump ON & OFF several times to clear any air that may have been trapped.
2. If the water does not ow out of the fountain, it may be caused by a kinked or loose water tube,
make sure the water tube is clear of any obstruction and tted properly.
www.PyleUSA.com
2
Power of pump can be
controlled
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
1
