EGO LM2142SP OPERATOR'S MANUAL

Loading ...

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2140SP/LM2140SP-FC 43

NOTICE: During drive gear mounting, the

surface of the gear stating "out" should

face toward outside (Fig. 33c).

6. Mount the wave washer and the

new wheel on the wheel axle. Note

that the round recess must face

outward.

7. Lock the wheel with the bolt by

tightening the bolt clockwise.

8. Mount the dust cover onto the wheel and press it into place.

REPLACING THE TRAILING SHIELD

WARNING: Always remove the battery pack when servicing or transporting the

mower.

WARNING: Never operate the mower unless the trailing shield is in place and

working. Never operate the mower with damaged safety devices. Failure to do so can

result in personal injury. The trailing shield is subject to wear and damage, which could

expose moving parts or allow objects to be thrown. For safety protection, frequently

check the trailing shield and replace it immediately with only the identical replacement

part, listed in this manual.

1. Remove the battery.

2. Turn the mower on its side with the upper surface against a wall.

3. Remove the rear wheel on the top side, following the section “REPLACING THE

WHEELS” in this manual.

4. Loosen the wheel cover locking

screw, then remove the wheel

cover from the wheel shaft

(Fig. 34).

5. Repeat steps 1 to 3 above the

remove the other rear wheel and

wheel cover.

OUT

33c

Wheel Cover

Locking Screw

Wheel Axle

Loading ...

EGO LM2142SP POWER+ 56-volt 21-in Cordless Self-propelled 5 Ah (Battery and Charger Included)