Booster PAC ES2500 User's Manual

Loading ...

OPERATING INSTRUCTIONS

Used as an Emergency Jump Starter

Note: For optimum performance, do not store your Booster PAC below 50° when

using as a jump starter. Never charge or jump start a frozen battery.

1. Use in a well ventilated area.

2. Shield eyes. Always wear protective eyewear when working near batteries.

3. Review this instruction manual and the instruction/safety manual provided by

the manufacturer of the vehicle being jump started.

4. Turn ignition off before making cable connections.

5. Clamp the positive (red +) clamp to the positive terminal on the vehicle

battery (for negative ground system), or an alternate vehicle starting point as

recommended by vehicle manufacturer.

6. Clamp the negative (black –) clamp to the vehicle frame (ground).

7. Make sure the cables are not in the path of moving engine parts (belts, fans,

etc.).

8. Stay clear of batteries while jump starting.

9. Start the vehicle (turn on the vehicle ignition).

Note: If the vehicle doesn’t start within 6 seconds, let the Booster PAC cool for

3 minutes before attempting to start the vehicle again or you may damage the

Booster PAC.

10. When the vehicle is started, disconnect the negative (–) battery clamp from the

vehicle frame and return it to its holster.

11.Disconnectthepositive(+)clampandreturnittoit’sholster.

Used as an Alternative Power Supply for Vehicles

Your Booster PAC is an essential tool for all who replace automobile batteries.

Most vehicles have electronic components with memory, such as alarm systems,

computers,radios,phones,etc.andwhenthevehicle’sbatteryisreplaced,thememory

is lost. However, if the power extension cord is plugged from the Booster PAC to the

12 Volt outlet on the vehicle, the memories can be saved.

Note: To use the Booster PAC for this purpose, the chosen outlet must be live when

the vehicle is turned OFF. On some vehicles, 12 Volt outlets are deactivated when the

vehicle is turned OFF.

Used as a Multipurpose Power Supply

Your Booster PAC is also a portable power source for all 12 Vdc accessories equipped

with a male 12 Volt plug. The DC outlet on the Booster PAC has automatic overload

protection.

When your Booster PAC is used with a DC to AC power inverter, it can operate

appliances normally powered by 120 Vac or 220 Vac. Recommended inverter for the

portable power source is 300 watts maximum. For more information, contact your

nearest Booster PAC dealer.

Loading ...

Booster PAC ES2500 1100 Peak Amp 12 Volt Jump Starter