Loading ...
Loading ...
3
Operating Instructions and Parts Manual 24389
MANUAL FLUID EXTRACTOR
• Before use, read and understand all warnings, safety
precautions, and instructions as outlined in the
vehicle manufacturer’s service manual. It is beyond
the scope of this manual to properly describe the
correct procedure and test data for each vehicle.
• Always perform vehicle service in a properly ventilated
area. Never run an engine without proper ventilation
for its exhaust. Stop work and take necessary steps
to improve ventilation in the work area if you develop
momentary eye, nose, or throat irritation as this
indicates inadequate ventilation.
• Engine parts that are in motion and unexpected
movement of a vehicle can injure or kill. When working
near moving engine parts, wear snug fit clothing and
keep hands and fingers away from moving parts.
Keep hoses and tools clear of moving parts. Always
stay clear of moving engine parts. Hoses and tools
can be thrown through the air if not kept clear of
moving engine parts. The unexpected movement of
a vehicle can injure or kill. When working on vehicles
always set the parking brake or block the wheels.
• Be alert for hot engine parts to avoid accidental burns.
• If you drove your car recently, fluids could be very hot.
Allow at least 2 hours before you handle any fluids. Oil
and Coolant burns are very dangerous.
• Avoid accidental fire and/or explosion. Do not smoke
near engine fuel and battery components.
• Never remove the cap from the radiator or expansion
tank while the engine is at operating temperature.
• Always allow the engine to cool before removing
the radiator cap or expansion tank cap. The cooling
system is under pressure. Failure to allow the engine
to cool before attempting to remove the cap could
result in serious injuries.
• The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are
factors which cannot be built into this product, but
must be supplied by the operator.
• For safety purposes and the prevention of damage
to expensive components it is advised that the user
have an understanding of basic automotive repair and
a working knowledge of automotive systems.
• We believe the information contained herein to be
reliable. However, general technical information is
given by us without charge and the user shall employ
such information at his own discretion and risk. We
assume no responsibility for results or damages
incurred from the use of such information in whole or in
part. Always refer to specific instructions and technical
information supplied by vehicle manufacturer.
• The manufacturer declines any and all responsibility
for damage to vehicles or components if said damage
is the result of unskillful handling by the operator or of
failure to observe the basic safety rules set forth in the
instruction manual.
• Used oil, antifreeze, brake fluid and transmission fluid
contains chemical compounds that can be harmful to
humans and other animals. When managed properly,
used oil may again be of beneficial use. Used oil may
be blended and recycled as a heating or industrial
fuel and also may be re-refined and made into new
lubricants. Persons who perform maintenance on
their own vehicles are responsible for managing the
used fluids in a manner that is protective of human
health and the environment and to follow all local laws
and regulations concerning their disposal.
DISPOSAL
At the end of the useful life of the Manual Fluid
Extractor, dispose of the components according to all
state, federal, and local regulations
PURPOSE
The 24389 Manual Fluid Extractor is designed for the
extraction of all types of engine, transmission and
lubricating oils from cars, motorcycles, marine engines
and industrial machinery. Also suitable for low viscosity
fluid such as water or coolant
07/14
2014 ©OEM-TOOLS
Reservoir Capacity
5.5L (1.45 Gallons)
PRODUCT SPECIFICATIONS
Loading ...
Loading ...
Loading ...