Loading ...
Loading ...
Loading ...
Fig.1
Fig.2
Fig.3
Fig.4
Using for the first time
• Before use, check that the appliance has not been damaged
during transport.
• Remove all packaging from the kettle and power base.
• Remove any labels from the outer surfaces except the rating
label.
• Remove the filter and rinse under a tap while brushing with a
soft brush (fig. 2) (refer to page 7 "Removing the scale filter").
• Fill the kettle to the max level and boil.
• The boiled water should be discarded and the kettle rinsed out
with cold water. This procedure should be carried out twice to
remove any manufacturing dust, etc.
• After the kettle has been rinsed out, refit the filter (fig. 3).
Using the kettle
With the specially designed power base and central connector,
you can now set the kettle on the base at any angle, from any
position.
• Release the cord from the storage base and adjust the length by
winding around the base to give the correct cord length to
reach the plug socket to be used (fig. 4).
• Do not leave loose cord hanging over the edge of work
surfaces.
Filling
• Remove the kettle from the base unit before filling.
• Remove the lid and fill the kettle to the desired level.
Do not fill with less than 0.3 litre of water (min level) to
prevent the kettle running dry while in use; misuse of this kind
will shorten the life of the element.
Do not fill with more than 1.7 litres of water (max. level).
If the kettle is overfilled, there is a risk that boiling
water may overflow and cause burns.
• To close the lid, push it onto the kettle body until it clicks firmly
into place.
• The water level indicator enables you to see the quantity of
water in the kettle.
5
Kettle KBJ 3001
Loading ...
Loading ...
Loading ...