Loading ...
Loading ...
Loading ...
USING THE VACUUM CLEANER
1: Before using the vacuum, first pull out a sufficient length of mains cable and plug into the mains socket.
The yellow mark on the electric flex cable is the maximum length that must not be exceeded.
To switch on the device, press the foot pedal button on the casing with your foot or hand.
2: To rewind the power cable, press the button
Hold the cable with one hand and guide the cable to ensure that it does not whip causing damage.
Caution:
Never operate the vacuum cleaner without the dust bag or motor filter fitted, otherwise the device
could be damaged.
REPLACING THE DUST BAG
Replace the dust bag as soon as the ³EDJIXOO´indicator becomes fully illuminated.
1. Switch off the vacuum and unplug from the mains power supply.
2. Remove the hose from the top cover of the vacuum and open the dust bag cover.
3. Carefully pull the cardboard holder to remove the dust bag and then dispose of full bag.
4. Insert a new dust bag by lining up the cardboard holder with the plastic tracks and sliding straight
down.
5. Adjust the corners of the bag to fill the bag compartment.
6. Close the dust bag cover and check that the hole in the bag lines up with the opening on the top
cover.
7. Reattach the hose and mains power and continue cleaning.
Don't forget to register for your 12 month guarantee at www.vytronix.com using product code: brandnew-
vytronix-rbc02
5
Loading ...
Loading ...
Loading ...