Read this manual carefully and never store it or the keys
inside the safe!
User Guide
Waterproof Fire Safe
Package Includes;
Please carefully check the above list to confirm all items have been received.
If any items are missing, please contact Consumer Assistance. (see page 9 for contact information).
1 - Waterproof Fire Safe
1 - Operation Manual
2 - Override Access Keys
1 - Mounting Kit
1 - Removable Shelf
4 - Shelf Clips
1Waterproof Fire Safe
1
2
3
4
5
6
7
8
9
0
#
*
ENGLISH
1Operation
Manual
1Mounting
Hardware
2 - Override
Access Keys
1 - Removable
Shelf
Models 2605, 2607 & 2609
DO NOT RETURN SAFE TO STORE
If you are missing parts or have difficulty operating your safe, please contact our
Consumer Assistance Department by telephone. Store will not accept returned products
without prior authorization. You must first contact our Consumer Assistance Department
(See page 9 for contact information).
Please go to the following webpage to register your product:
www.hymaninc.com/product-registration/
Safe Serial #
Located on the bottom right corner of the safe door frame (Figure 1).
Override Access Key #
Engraved on the Head of the key (Figure 2).
Cylinder #
Engraved on the lock cylinder (Figures 3).
Safe Model #
Safe Serial #
Override Access Key #
User Code
LOCATING SAFE IDENTIFICATION NUMBERS
PRODUCT REGISTRATION
SAFE IDENTIFICATION RECORD
Figure 1 Figure 2 Figure 3
1
2
3
4
5
6
7
8
9
0
#
*
WELCOME ......................................................................................PAGE 1
PROPER SAFE USE .......................................................................PAGE 1
CARE AND MAINTENANCE .........................................................PAGE 1
INTERIOR MOISTURE WARNING ...............................................PAGE 2
GETTING STARTED.........................................................................PAGE 2
INSTALL BATTERIES .....................................................................PAGE 2
TESTING DIGITAL LOCK ..............................................................PAGE 3
PROGRAMMING NEW USER CODE ..........................................PAGE 4
TESTING NEW USER CODE ........................................................PAGE 4
LOCKING AND UNLOCKING .......................................................PAGE 5
TURN SOUND ON AND OFF ........................................................PAGE 5
MOTION ALARM SETTINGS .......................................................PAGE 5
SECURE LOCKOUT PERIOD .......................................................PAGE 6
LOST OR FORGOTTEN USER CODES .......................................PAGE 6
OVERRIDE ACCESS KEY ................................................................PAGE 6
REMOVABLE SHELF .......................................................................PAGE 6
ANCHORING SAFE TO A FLOOR.................................................PAGE 7
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS .............PAGE 8
LOCATING SAFE IDENTIFICATION NUMBERS .......................PAGE 8
CONSUMER ASSISTANCE ..........................................................PAGE 9
WARRANTY ....................................................................................PAGE 10
INDEX
1
PROPER SAFE USE
CARE AND MAINTENANCE
Your Honeywell Waterproof Fire Safe will provide years of safe and secure protection for
your valuables, important documents and other personal items. All Honeywell safes are
designed and built using the highest manufacturing standards to ensure maximum user
satisfaction under a variety of conditions. With proper care, your Honeywell safe will provide
“Peace of Mind” for many years to come.
Thank you and enjoy!
WELCOME
Honeywell Waterproof Fire Safes are designed to protect paper documents and files from
heat and water damage due to exposure to fire and floods.
Fire Protection
Independent testing verified the interior temperature remains below 350º F (177ºC) for 2
hours when outside temperature is up to 1550ºF (843ºC).
Water Protection
Independent testing verified that the interior remains dry when completely submerged
for up to 8 hours with up to 50mm of water above the safe.
IMPORTANT: Before using your new safe, it should be opened and aired out for at
least 30 minutes to allow the waterproof seal to decompress and perform as intended.
WARNING: This safe is not intended for the storage of medications, pearls, firearms,
ammunition, or combustible items of any kind.
When properly maintained, your safe will continue to operate for many years. In order to ensure optimum
performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris or
liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,
window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive
cleansers on the safe or digital keypad.
MOISTURE – We recommend that you place delicate items such as pictures or intricate jewelry into an
air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity. For
optimum performance, the safe should be opened and aired out for at least 20 minutes every two weeks.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!
INTERIOR MOISTURE WARNING
IMPORTANT: For optimum performance, Waterproof Fire Safes should be opened and aired
out for at least 30 minutes every two weeks to prevent any build up of moisture inside. It is
recommended to occasionally do this for longer periods. This will balance the humidity difference
inside and outside and allow any excess moisture trapped inside to escape. If you do not open
Waterproof Fire Safes on a regular basis to let them air out, you may begin to notice a musty
smell, especially on paperwork. The manufacturer will not be responsible for any damage or loss of
items placed in Waterproof Fire Safes due to moisture. Proper care and preventative maintenance
of Waterproof Fire Safes is the owner’s responsibility. The owner should understand that this is
required to assure continued levels of protection and trouble-free performance during the lifetime.
2
The batteries must be installed before using your safe. The battery compartment is located inside
the safe on the lock cover panel.
1. Remove battery compartment cover and insert 4 “AA” batteries. Make sure that the
batteries are installed in the correct direction with regard to polarity (+ and -).
(Figure 1 & Figure 2).
2. Proper installation of the batteries will cause the keypad to beep once, the red and green LED
lights will flash twice and the keypad back light will flash once.
3. Replace the battery cover (Figure 3).
4. Leave the door open. Proceed to the “Testing Digital Lock” section on next page.
INSTALL BATTERIES
GETTING STARTED
1. Remove override access rubber lock cover (Figure 1).
2. Insert the override access key into the lock until it stops (Figure 2).
3. With the key inserted turn clockwise to the right (Figure 3).
4. Turn the door handle upwards counterclockwise and pull the safe door open
(Figure 4 & Figure 5).
IMPORTANT: IF THE HANDLE WILL NOT TURN UPWARDS COUNTERCLOCKWISE, FIRST
TURN THE HANDLE SLIGHTLY BACK TO THE LEFT UNTIL IT STOPS, THEN TURN UPWARDS
COUNTERCLOCKWISE AGAIN TO OPEN.
5. Remove override access key and store it in a safe place away from the safe. Replace the
cover over the key lock, leave safe door open, and proceed to “Install Batteries”.
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5
1
2
3
4
5
6
8
9
0
#
*
7
1
2
3
4
5
6
8
9
0
#
*
7
1
2
3
4
5
6
8
9
0
#
*
7
Figure 1 Figure 2 Figure 3
1. With the door open: press and hold the lock release button on the inside edge of the safe door and
while holding, turn the handle downward clockwise to place the bolts in the locked position
(Figure 1 and Figure 2).
2. Press the * key to activate the digital keypad (Figure 3).
Note: Once the * key is pressed, keypad back-light will turn on for 5 seconds. The keypad will
remain active for a period beyond the five seconds even when the back-light turns off. Once any
key is pressed, the back-light will come back on again.
3. Enter the preset factory code 159# into the keypad. If entered correctly, the green LED will light
and the lock will click. You have 5 seconds to turn the handle upwards counterclockwise placing
the bolts into the unlocked position.
Important: If the handle will not turn upwards after the green light comes on, first turn
the handle slightly back to the left until it stops, then turn upwards counterclockwise again
to open.
4. Press and hold the lock release button on the inside edge of the safe door and while holding, turn
the handle downwards clockwise to return the bolts to the locked position
5. Leave the safe door open and proceed to “Programming New User Code”.
TESTING DIGITAL LOCK
Figure 1 Figure 3Figure 2
1
2
3
4
5
6
8
9
0
#
*
7
3
1. With the door open, press the * key to activate the digital keypad (Figure 1).
Note: Once the * key is pressed, keypad back-light will turn on for 5 seconds. The keypad will
remain active for a period beyond the five seconds even when the back-light turns off. Once any
key is pressed, the back-light will come back on again.
2. Enter your new user code into the keypad followed by the # key. If entered correctly, the green
LED will light and the lock will click. You have 5 seconds to open the safe by turning the handle
upwards counterclockwise placing the bolts into the unlocked position (Figure 2).
Important: If the handle will not turn upward after the green light comes on, first turn
the handle slightly back to the left until it stops, then turn upward counterclockwise again
to open.
Note: If you wish to change you user code, just repeat steps 13. The previous user code will be
automatically deleted and the new user code will become active.
PROGRAMMING NEW USER CODE
TESTING NEW USER CODE
Figure 1
Figure 1
Figure 3Figure 2
Figure 2
For best security, it is recommended that you immediately change the factory preset code to your
own personal user code.
1. Locate and press the reset program button located on the top inside edge of the door (Figure 1).
The red and green LED’s will flash and you will have 10 seconds to perform the next 2 steps.
2. Enter a new 38 digit user code followed by the # key. Then immediately repeat the same entry
followed by the # key to confirm (Figure 2).
3. The Green LED will light for 5 seconds indicating you have successfully programmed your new
user code (Figure 3).
Note: If the red LED lights for 5 seconds and the keypad beeps 3 times, this means that you have
made an incorrect entry and must repeat steps 1 and 2.
4. Leave door open and proceed to “Testing New User Code” section.
4
If you desire to deactivate the sound on the keypad you can follow the steps below.
Enter # 5 # on the keypad to turn off the sound. Re-enter # 5 # to turn the sound back on.
Note: If when entering your code or programming a new user code you do not hear the key beep, enter
# 5 # to activate the sound.
This safe is equipped with a motion sensor alarm that detects sudden jolts, violent shaking and
vibrations. If you want to use the alarm feature, you must activate it by following the steps below.
There are three levels of sensitivity to choose from:
Low Sensitivity
Medium Sensitivity
High Sensitivity
Turn Off Alarm
Setting the motion alarm
1. Open door
2. Press the reset button and press one of the following options for alarm loudness:
- Low: #1#
- Medium: #2#
- High: #3#
- To turn off the alarm press #0#
3. Your desired alarm settings will be active after the battery lights on the LED go on then off.
Note: You can record your new user code on the “Digital User Code Record” section on page 9 and then
keep this manual in a secure location away from the safe.
LOCKING AND UNLOCKING THE SAFE
TURN SOUND ON AND OFF
MOTION ALARM SETTINGS
Figure 1 Figure 2
1. Close the safe door and turn handle downward to the left placing the door bolts into
the locked position (Figure 1 and Figure 2).
Note: Due to the airtight seal, to close you may have to push inward on the door while turning the
handle downward clockwise to place the blots fully into the locked position.
2. Safe will automatically lock after 5 seconds.
3. Check to ensure safe is locked by attempting to turn the handle to the unlocked position.
5
Figure 3
Your safe is equipped with an Override Access key which allows immediate access in case you forget
your user codes or the batteries need to be installed or replaced.
SECURE LOCKOUT PERIOD
OVERRIDE ACCESS KEY
REMOVABLE SHELF
If the wrong user code is entered 3 consecutive times in a row, the keypad will automatically lockout
and will not be able to open the safe with the keypad for 15 minutes. During this period, the safe can
be opened and locked with the Override Access key.
6
LOST OR FORGOTTEN USER CODES
If the user code is lost or forgotten, you may open the safe using the Override Access key and use the
red reset button to reprogram the 38 digit user code. The instructions for opening the safe with the
override access key are located below.
The safe comes with a shelf that can be placed in any of the three preset levels or completely
removed if not needed. To remove the shelf, slide it gently out of the safe. To install the shelf, slide it
in on any of the three preset levels.
1. Remove override access rubber lock cover (Figure 1).
2. Insert the override access key into the lock until it stops (Figure 2).
3. With the key inserted turn clockwise to the right (Figure 3).
4. Turn the door handle upwards counterclockwise and pull the safe door open
(Figure 4 & Figure 5).
IMPORTANT: IF THE HANDLE WILL NOT TURN UPWARDS COUNTERCLOCKWISE, FIRST
TURN THE HANDLE SLIGHTLY BACK TO THE LEFT UNTIL IT STOPS, THEN TURN UPWARDS
COUNTERCLOCKWISE AGAIN TO OPEN.
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5
1
2
3
4
5
6
8
9
0
#
*
7
1
2
3
4
5
6
8
9
0
#
*
7
1
2
3
4
5
6
8
9
0
#
*
7
ANCHORING SAFE TO FLOOR
You may bolt your safe to a shelf or floor for added theft protection and resistance to tipping.
Your safe has a pre-drilled bolt-down hole in the floor panel and mounting hardware is
provided for securing to concrete surfaces. If bolting to wood or metal additional hardware will
be needed. Check with your local home center.
To secure your safe to a concrete floor:
1. Select a suitable and convenient location for your safe (Figure 1).
2. Empty the safe and remove the (6) screws securing the mounting hole
cover plate (Figure 2).
3. Remove the mounting hole cover plate and gasket along with the cap to
uncover the mounting hole (Figure 3).
4. Tilt the safe onto it’s back side and stick a screwdriver into the hole to
punch-out the bottom hole cover plug (Figure 4).
5. Turn safe back onto its feet and place your safe in the desired location for mounting, then
make a mark through the hole onto the floor surface creating a drilling guide (Figure 5).
6. Move the safe aside to clear the marked spot for drilling. Then drill a 5/8 in./16mm
diameter hole with a depth of 21/8 in./54mm and remove any excess dust
(Figure 6 and Figure 7).
7. Insert the supplied expanding Drop-in Anchor into the hole and tap into place using a
hammer until even with the floor surface (Figure 8).
8. Hammer a drift punch or phillips head screwdriver into the expanding Drop-in Anchor so
that it flares out and firmly locks into place to prevent it from turning when mounting the
safe (Figure 9).
9. Place the safe back into position lined up over the hole and secure in place using the
provided mounting bolt. Secure bolt tightly using the supplied hexagon wrench (Figure 10).
10. Replace the gasket and mounting plate cover by using a phillips screwdriver to replace the
6 screws to secure the mounting plate into place (Figure 11).
7
Figure 1
Important: Bolting/unbolting of the unit is at
the consumer’s expense and discretion. LH
Licensed Products, Inc. is not responsible for
any costs incurred if the unit has to be replaced.
If you have any questions about mounting the
safe, please check with your local home center/
hardware retailer or independent contractor.
Figure 2
Figure 6
Figure 11
Figure 3
Figure 7
Figure 5
Figure 9
Figure 10
Figure 4
Figure 8
8
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS
The following information is required to obtain a Key:
1. PROOF OF OWNERSHIP (1 of 2 Options Below)
SALES RECEIPT & IDENTIFICATION - INTERNATIONAL ORDERS ONLY!
• Copy of sales receipt showing Store, Date & Product Description.
• Copy of your picture I.D. (Drivers license, passport, regular I.D.).
PRODUCT OWNERSHIP VERIFICATION FORM
If sales receipt is not available, contact us by email or telephone to
request a “Product Ownership Verification Form”.
2. CONTACT & PRODUCT INFORMATION
CONTACT INFORMATION PRODUCT INFORMATION
• Name & Mailing Address • Safe Model #
• E-mail address (If Available) • Safe Serial #
• Telephone Number
• Best Time to Contact You
3. METHOD OF PAYMENT
• Telephone: Visa or MasterCard
• Mail: Check or Money Order
NOTE: For pricing please contact Consumer Assistance. Contact information is located
on the back cover of this manual.
Terms subject to change without prior notification.
SERIAL NUMBER
Located on lower right
corner on front of safe. (Figure 1)
Do Not Remove Safe I.D. Tags!
KEY NUMBER
3 Digit Number engraved on the lock cylinder
(Figure 2).
LOCATING SAFE IDENTIFICATION NUMBERS
Figure 1
Figure 2
1
2
3
4
5
6
7
8
9
0
#
*
INTERNATIONAL CALL BACK HOURS:
If you need to speak with a consumer assistant and cannot contact us during the Call
Center hours above, please send an email or leave a telephone message, including your
Name, Telephone Number and the best time for us to contact you during the Call Back
hours above and we will make every effort to contact you and help answer any of your
questions or concerns.
* Insert correct Country Code
** Local Time based on Los Angeles California USA
CONSUMER ASSISTANCE
LHLPCustomerSer[email protected]
www.honeywellsafes.com
Consumer Assistance Dept.
LH Licensed Products, Inc.
860 East Sandhill Avenue
Carson, CA 90746 USA
US/Canada 18773545457 (Toll Free)
Mexico 018002882872 After English voice
recording stops you must then enter 8008601677
to complete your call. (Toll Free)Australia
001180053257000 (Toll Free)
Germany/New Zealand 0080053257000 (Toll Free)
Other Countries XX*3103235722 (Toll Charges Apply)
XX*- Dial U.S. Country Code first
US/Canada 7am - 5pm (PST**) Mon - Fri
Other Countries 7am 8pm (PST**) Mon - Fri
PST**- Local time in Los Angeles, CA, USA
EMAIL:
WEBSITE:
ADDRESS:
TELEPHONE:
CALL CENTER HOURS:
CALL BACK HOURS:
9
10
LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of seven (7) years from the date of purchase,
this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc.,
at is sole option and as the purchaser’s sole remedy under this warranty, will repair or replace this product or any
component of the product found to be defective during the warranty period. Replacement or repair will be made
with a new or remanufactured product or component. If the product is no longer available, replacement may be
made with a similar product of equal or greater value.
THIS IS YOUR EXCLUSIVE WARRANTY.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount tot a major failure.
This warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not
transferable. You must keep the original sales receipt. Proof of purchase is required to obtain warranty service.
LHLP, Inc. dealers, service centers, or retail stores selling this product do not have the right to alter modify or in
anyway change the terms and conditions of this warranty.
This warranty does not apply to the finish on the product. This warranty does not cover normal wear and tear of
parts or damage resulting from any of the following: negligent use or misuse of the product, use contrary to the
operating instructions, disassembly, repair or alteration by anyone other than LHLP, Inc. Or an authorized service
center, improper installation, or exposure to extremes of heat or humidity. Further, the warranty does not cover
Acts of God, such as fire, flood, earthquakes, hurricanes and tornadoes.
LHLP, Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express
or implied warranty or otherwise relating to the sale of this product. LHLP, Inc. is also not responsible for : costs
associated with removing or installing the product; damage or loss of the contents of the product; nor for the
unauthorized removal of the contents; or damages incurred during shipment.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE, AND LHLP, INC. DISCLAIMS
ANY AND ALL OTHER COVENANTS AND WARRANTIES.
Except to the extent prohibited by applicable law, and implied warranty of merchantability or fitness for a particular
purpose is limited in duration to the duration of the above warranty period. Some states, provinces or jurisdictions do
not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied
warranty, lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state, or province to province, or jurisdiction to jurisdiction.
LIFETIME AFTERFIRE REPLACEMENT GUARANTEE
If this Honeywell fire resistant product was purchased from LH Licensed Products, Inc. (“LHLP”) and is damaged
by fire at any time while still owned by you (the original owner), LHLP will ship a free replacement if you send the
following to Customer Service, LH Licensed Products, Inc., 860 E. Sandhill Ave., Carson, CA 90746 USA:
1. Your name, mailing address, email address, and phone number with area code;
2. A description of the fire, the model number and a photo of the burned unit, and a copy of the report from the fire
department, insurance or police.
Freight on the replacement unit is not included in the guarantee and must be paid by the consumer. If an identical
product is no longer available, LHLP will provide a similar unit from its current product line. LHLP is not responsible
for any loss or damage to the contents of the safe.
LIMITED WARRANTY
Manufactured by:
LH Licensed Products, Inc.
860 East Sandhill Avenue
Carson, CA 90746
www.honeywellsafes.comM2607 E V3
The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell
International Inc. makes no representations or warranties with respect to this product.
