Loading ...
Loading ...
Loading ...
CARE AND MAINTENANCE
ALWAYS:
- Clean everyday by thoroughly rinsing with a mild
soap and warm water and wipe dry. Some
chemicals such as chlorides may corrode stainless
steel, make sure you rinse the surface immediately.
- Rub lightly with a soft cloth in the direction of grain
lines on a regular basis for additional preventive
cleaning.
- Keep the sink free of any standing water as this
can cause a buildup of mineral deposit, which can
affect the appearance of your sink.
- Any stubborn stains should be removed by
scrubbing in the direction of the grain with a mild
abrasive such as Comet.
- Always rinse the sink after using any cleaning
agent and wipe dry. Clean any mineral deposits built
up over time with a mild solution of vinegar and
water followed by a thorough flushing with water.
Towel dry after each use to prevent mineral deposits
from building up on the surface of the sink.
- Remove any scratches with a Scotch-brite pad and
cleaning agent rubbing in the direction of the grain.
NOT RECOMMENDED FOR MIRROR FINISH.
NEVER:
- Leave water spots, steel cookware, utensils, wet
sponges, cloths or cleaning pads in the sink for
lengthy periods; iron particles often develop rust
spots in the stainless steel surface.
- Use a steel wool or scoring pad as it damages the
sink surface and causes discoloration.
- Rub the sink across the stainless steel finish lines.
- Let household cleaning agents or bleach sit in your
sink for long period of time as this may ruin the finish
of your sink.
- Leave rubber mats, sponges, or cleaning pads in
the sink for long period of time as this may ruin the
finish of your sink.
- Use any drain cleaning products containing
sulfuric acid or hydrochloric acid as this will attach
the sink. Silver cleaners can also contain acids that
will damage the sink surface.
- Use the inside of the sink as cutting surface.
- Use a steel wool pad to clean your sink.