Loading ...
Loading ...
Loading ...
11
4 Full-Color Camera Configuration
This chapter introduces how to configure the working modes of smart light, including auto and
manual. Smart light will change the brightness of white light automatically according to the ambient
lighting condition to avoid over-exposure. Smart light is only available for full-color camera.
Enabling/Disabling Smart Light 4.1
Smart light is enabled by default. To switch the mode of smart light, enter OSD menu (Figure 3-7) and
select Light > Smart Light.
Configuring Smart Light Adjustment 4.2
In the smart light mode, configure the maximum brightness level of the smart light, and the device
will change brightness automatically according to the ambient lighting condition. You can also
configure the sensitivity of the smart light.
Configuring Brightness Level
On the OSD menu, select Light > Smart Light > Level. Step 1
Select from 1 to 5 to configure the maximum brightness level. Step 2
The maximum brightness level is 5 by default.
Click Return and then Exit to exit the configuration. Step 3
You can also configure the brightness level manually in Light > Manual > Level.
Configuring Sensitivity
Select Light > Smart Light > Sensitivity. Step 1
Select from 1 to 5 to configure the sensitivity value of the smart light. Step 2
The higher the value is, the easier the smart light will be woken up.
The sensitivity value is 3 by default.
Click Return and then Exit to exit the configuration. Step 3
Loading ...
Loading ...
Loading ...