Loading ...
Loading ...
Loading ...
35
Chapter 6: Basic features
Using the 3D glasses
Each part's name and function:
To set the 3D glasses:
1 When you use for the first time,
peel off the protective films
from the lenses.
2 Turn the 3D glasses on with the
power switch.
Note: If the infrared data communication between the
television and 3D glasses is lost for 5 minutes, the 3D
glasses turn off automatically to preserve battery life.
To charge the battery:
If the 3D glasses are turned on while the battery power
is low, the power light will blink 5 times. (If the battery
is dead, the power light will not blink or light.)
1 Turn the 3D glasses off with the power switch, and
connect to the TV with the battery charge cable.
Note:
•If the 3D glasses are turned on, the battery will not
charge.
•When the TV is turned off or in standby mode, the
battery will be not charged.
•Using a USB cable other than the battery charge
cable is not covered under warranty.
2 The power light will light up.
3 When the light goes out, the charging is completed.
Note: It takes approximately 2 hours to charge the
battery.
To check the battery level:
When the 3D glasses are turned on, the behavior of
power light is different.
•Charged: lights up for 2 seconds
•Low charge: blinks 5 times
ON
OFF
DC IN
Lens (liquid-crystal
shutter)
A right and left liquid-
crystal shutter opens
and closes alternately
with the images for the
left eye and for the right
eye alternately projected
on the television screen.
In this way, 3D images
are reproduced.
Power switch and
power light
Turns on or off the
power of 3D glasses
with the switch.
– When working, the
power light blinks
once every 2
seconds.
– When the power is
turned off, the power
light goes out.
Power switch
Power light
Infrared reception
part
Receives the infrared
signal for the liquid-
crystal shutter control
sent from the television.
Protective films
Peel these off before beginning use.
USB terminal
When charging the battery,
connect to the TV with the
battery charge cable.
Peel off
Loading ...
Loading ...
Loading ...