DCN650B Instruction Manual

Loading ...

English

also charge a partially used pack whenever you desire

with no adverse effect on the battery pack.

5. Foreign materials of a conductive nature such as, but

not limited to, grinding dust, metal chips, steel wool,

aluminum foil, or any buildup of metallic particles

should be kept away from charger cavities. Always

unplug the charger from the power supply when there

is no battery pack in the cavity. Unplug the charger

before attempting to clean.

6. Do not freeze or immerse the charger in water or any

other liquid.

Storage Recommendations

1. The best storage place is one that is cool and dry, away

from direct sunlight and excess heat or cold.

2. For long storage, it is recommended to store a fully

charged battery pack in a cool dry place out of the

charger for optimal results.

nOTE: Battery packs should not be stored completely

depleted of charge. The battery pack will need to be

recharged before use.

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

COMPONENTS (FIG. A)



WARNING: Never modify the power tool or any part

of it. Damage or personal injury couldresult.

Refer to Figure A at the beginning of this manual for a

complete list ofcomponents.

Intended Use

The DCN650 Cordless Finish Nailer has been designed for

driving nails into wooden workpieces.

DO nOT use under wet conditions or in presence of

flammable liquids orgases.

This cordless finishing nailer is a professional power tool.

DO nOT let children come into contact with the tool.

Supervision is required when inexperienced operators use

thistool.



WARNING: Lock the trigger lock-off in the locked

position, disconnect battery pack from tool and

remove nail strips from magazine before making

adjustments or personal injury may result.

Refer to FigureA at the beginning of this manual for a

complete list of components.

ASSEMBLY AND ADJUSTMENTS



WARNING: To reduce the risk of serious personal

injury, turn unit off and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start-up can causeinjury.

Belt Hook (Fig. D)



WARNING: Remove nails from magazine before

making any adjustments or servicing this tool. Failure

to do so may result in serious injury.



WARNING: Disconnect battery pack from tool

before making any adjustments, changing

accessories, servicing, or moving the tool. Such

preventative safety measures reduce the risk of

starting the tool accidentally.



CAUTION: When not in use, place tool on its side

on a stable surface where it will not cause a

tripping or falling hazard. Some tools with large

battery packs will stand upright on the battery pack

but may be easily knocked over.

The

DEWALT

cordless nailers include an integrated belt

hook

10

and can be attached to either side of the tool to

accommodate left- or right-handed users.

If the hook is not desired at all, it can be removed from

thetool.

Fig. D

To remove belt hook

1. Remove battery pack from tool.

2. To switch the tool from right- to left-hand usage simply

remove the screw

17

from the opposite side of the tool

and reassemble on the other side.

3. Replace battery pack.

Tool Specifications

Firing Mode Selectable: Sequential or Bump

Voltage 20

Height 13.3" (33.7 cm)

Width 3.7" (9.3 cm)

Length 12.9" (32.7 cm)

Weight (without battery) 5.8 lbs. (2.6 kg)

Magazine Angle 34

Loading Capacity 110 nails

Nail Specifications

Nail Lengths 1 1/4" – 2 1/2" (32 mm 64 mm)

Shank Diameters 15 gauge

Nail Stick Angles 34

OPERATION

