Loading ...
Loading ...
Loading ...
LEVELING AND DOOR ALIGNMENT
Leveling
Your refrigerator has two front leveling screws--one on
the right and one on the left. If your refrigerator seems
unsteady or you want the doors to close easier, adjust the
refrigerator's tilt using the instructions below:
1. Plug the refrigerator's power cord into a 3-prong
grounded outlet. Move the refrigerator into its final
position.
2. Turn the leveling screw clockwise to raise that side of
the refrigerator or counterclockwise to lower it. It may
take several turns of the leveling screw to adjust the tilt
of the refrigerator.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling screws.
This makes it easier to adjust the screws.
Door Alignment
If the space between your doors is uneven, follow the
instructions below to align the doors:
1. Lift up the door at hinge side with one hand where you
want to raise up.
2. Insert a snap ring with another hand by twisting using
pliers.
3. Insert a snap ring until the doors aligned enough
(3 snap rings provided with Owner's manual).
3. Open both doors again and check to make sure that
they close easily. If not, tilt the refrigerator slightly more
to the rear by turning both leveling screws clockwise. It
may take several more turns, and you should turn both
leveling screws the same amount.
4. Re-adjust if necessary.
5. Replace the base grille.
NOTE: Your new refrigerator is uniquely designed with
two fresh food doors. Either door can be opened or
closed independently of one another. And doors not
closed automatically so you have to push to get them
to seal.
14
Loading ...
Loading ...
Loading ...