Loading ...
Loading ...
Loading ...
-7-
V. CARE & MAINTENANCE (cont’d) VI. OTHER
VI. a - SERVICE INFORMATION:
Before calling for service, please check the following:
Is the electrical cord plugged in?
Is the fuse OK or circuit breaker on?
Is the power switch “ON”?
If after checking the above items and the unit is still not
operating properly, please contact an authorized
Traulsen service agent. A complete list of authorized
service agents was provided along with your Traulsen
unit. If you cannot locate this, you may also obtain the
name of a service agent from the Service/Contact page
of our website: www.traulsen.com.
If service is not satisfactory, please contact our in-house
service department at:
Traulsen
4401 Blue Mound Road
Fort Worth, TX 76106
(800) 825-8220
Traulsen reserves the right to change specifications or
discontinue models without notice.
VI. b - SPARE PARTS:
Spare or replacement parts may be obtained through a
parts supplier or one of our authorized service agents.
A complete list of authorized service agents
accompanies this manual and is also posted on our
company’s official website @ www.traulsen.com.
VI. c - WARRANTY REGISTRATION:
For your convenience, the warranties on your new
Traulsen unit may be registered with us on-line at
www.traulsen.com, or by completing and returning the
warranty card included along with the unit. To do so on-
line, from the menu at the top of the home page, first
select PRODUCT SUPPORT. Upon loading that page,
select WARRANTY INFO from the menu on the left. A
link to the WARRANTY REGISTRATION FORM should
appear. Click on this to load the form, complete the
required information, and hit the SUBMIT button.
V. g - REPLACING THE LIGHT BULB:
All Traulsen R & A Series models are supplied with
incandecent lighting unless optional fluorescent
lighting was ordered (except for sliding glass door
models for which fluorescent lights are supplied
standard).
The bulb is a 115 volt/40 watt, T-6
1
⁄2 intermediate clear
refrigerator lamp. It is mounted at the top front of the
cabinet at the center, and is located behind a plastic light
cover on refrigerator and freezer model.
Heated units (RHF/AHF/RIH/AIH/RDH/ADH/RIDH/AIDH)
are equipped with a similar type bulb, however this is
shatterproof because these models do not include a
plastic light cover.
To replace the bulb, first remove the light cover (if so
equipped). This can be accomplished by squeezing it
together on both sides until it comes free. Replace the
light bulb, then squeeze both sides of the light cover
together and replace in its original position.
V. h - REPLACING THE OPTIONAL CONDENSER FILTER:
Some Traulsen R & A Series models are supplied with
an optional filter screen for the condenser coil. This is
located behind the louver assembly, and must be cleaned
at least once a month, or more frequently if needed, to
insure proper equipment operation.
To clean the condenser filter, first disconnect electrical
power to the cabinet and lift up the front louver
assembly. To lift this, remove the two screws located
on both sides at the bottom of the louver assembly. The
filter is located on the face of the condenser coil, and
can simply lifts up and away for cleaning (see figure 12).
Fig. 12
Filter
Loading ...
Loading ...
Loading ...