Loading ...
Loading ...
Loading ...
● Recovering from Power Saving
Operation
Press any button, perform a crown operation,
or place the watch in a well-lit area to recover
from power saving.
Auto Time Adjustment
Your watch can receive time calibration
signals and connect with a phone to obtain
information that it uses to adjust its day and
time setting.
● Time Adjustment Using a Time
Calibration Signal
Your watch automatically receives a time
calibration signal at a specific times each day
and adjusts its time setting. This means its
time setting is always accurate without the
need for any adjustment by you.
l
Auto Time Calibration Signal Receive
Time calibration signal
Note
●
You can also trigger a time calibration
signal receive operation manually.
l
Manual Time Calibration Signal
Receive
● Using a Phone to Adjust the Watch’s
Time
While the watch is paired with a phone, it will
automatically connect with the phone four
times a day and adjust its time setting in
accordance with the phone time.
l
Auto Time Adjustment
12:30
● If the watch is not showing the correct
time...
If the watch does not indicate the correct time
even after it receives a time calibration signal
or connects with the phone, adjust the hand
and day indicator positions.
l
Using CASIO WATCHES to Make
Adjustments
l
Using Watch Operations to Make
Adjustments
Checking the Last Time
Adjustment Result
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2. Press (B).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Second hand
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2. Press (B).
The second hand will indicate the last
receive result for nine or ten seconds.
30
3. Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
●
If more than 10 seconds elapse before
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4. Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
30
Crown
5. Push the crown back in.
Note
●
If the watch is paired with a phone,
CASIO WATCHES can be used to
disable auto time adjustment.
l
Using CASIO WATCHES to
Disable Auto Time Adjustment
Operation Guide 5526
5
Loading ...
Loading ...
Loading ...