Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/64266464-wau24t42es-01/bg33.png)
Troubleshooting en
51
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start.
You have not pressedInicio/Pausa+ Carga .
▶
Press Inicio/Pausa+ Carga .
Door is not closed.
1. Close the door.
2. Press Inicio/Pausa+ Carga to start the pro-
gramme.
Childproof lock is activated.
▶
→"Deactivating the childproof lock", Page40
Termin. is activated.
▶
Check whether Termin. is activated.
→"Buttons", Page23
Laundry is caught in the door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Inicio/Pausa+ Carga to start the pro-
gramme.
The door cannot
beopened.
–––– is activated.
▶
Continue the programme by selecting or and
pressing Inicio/Pausa+ Carga .
→"Resuming the programme when the programme
status is Rinse Hold", Page39
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→"Cancelling the programme", Page39
Water level is too high.
▶
Start the programme.
Power failure.
▶
Open the door using the emergency release.
→"Emergency release", Page57
The water is not drain-
ing.
Drain pipe or water outlet hose is blocked.
▶
Clean the drain pipe and the water outlet hose.
Loading ...
Loading ...
Loading ...