Loading ...
Loading ...
Loading ...
35
EN
Inserting, changing and
removing the water fi lter
The Melitta
®
Claris
®
water fi lter removes
lime and other harmful substances from
the water. The water fi lter should be
changed regularly, at the latest, however,
when the appliance prompts to do so.
The water fi lter is available in specialised
shops.
When the water fi lter is inserted, changed
or removed, this must be confi rmed in the
Filter sub-menu. Once the water fi lter is
inserted or changed, the appliance resets
the water fi lter cycle to zero and is able to
prompt for changing the water fi lter again
at the right time.
Inserting the water fi lter
• Put the water fi lter in a glass with
tap water for several minutes before
inserting it in the appliance.
• Call up the Care sub-menu.
• Select Filter in the menu.
• Select Insert fi lter in the menu.
• Select Start in the menu.
• Flip up the lid of the water reservoir 6.
• Pull the water reservoir 6 up and out of
the appliance.
• Carefully screw the Melitta
®
Claris
®
water fi lter into the thread on the base
of the water reservoir using the screw-
in aid at the bottom end of the coffee
scoop provided.
• Fill the water reservoir 6 with tap water
up to the max. mark.
• Reinsert the water reservoir 6.
• Press the rotary switch 10 to confi rm.
• Empty the vessel (min. 0.5 l capacity)
and place it under the outlet 3 again.
• Press the rotary switch 10 to confi rm.
The appliance rinses and then returns to
standby mode.
The water hardness is automatically set
to Soft.
Changing the water fi lter
The water fi lter should be changed when
a prompt to do so appears on the graphic
display 4.
• Call up the Care sub-menu.
• Select Filter in the menu.
• Select Change fi lter in the menu.
• Select Start in the menu.
• Flip up the lid of the water reservoir 6.
• Pull the water reservoir 6 up and out of
the appliance.
• Unscrew the water fi lter from the thread
on the base of the water fi lter.
• Carefully screw the new Melitta
®
Claris
®
water fi lter into the thread on the base
of the water reservoir using the screw-
in aid at the bottom end of the coffee
scoop provided.
• Fill the water reservoir 6 with tap water
up to the max. mark.
• Reinsert the water reservoir 6.
• Press the rotary switch 10 to confi rm.
• Empty the vessel (min. 0.5 l capacity)
and place it under the outlet 3 again.
• Press the rotary switch 10 to confi rm.
The appliance rinses and then returns to
standby mode.
BA_CI_042015.indd 35BA_CI_042015.indd 35 20.04.2015 20:45:1220.04.2015 20:45:12
Loading ...
Loading ...
Loading ...