Loading ...
Loading ...
Loading ...
5
Installation
5. Position the back stop behind the pivot stop in the middle of the cabinet and mark out the hole position.
Drill 4 holes, 2mm diameter for the screws supplied. Attach the backstop (see diagram below).
NOTE: Failure to install the backstop will weaken the product
6. Attach board retainer using the two screws supplied. The board retainer is to be positioned as shown in
the diagram below (30mm from the front of the cabinet to the centre of plastic retainer bracket; 780mm
from the top of height adjustment bracket to the centre of the plastic retainer bracket).
7. Fit the board cover with the silver/grey coating face up.
780
30
Loading ...
Loading ...
Loading ...