Loading ...
Loading ...
Loading ...
17 / 28 EN
Refrigerator / User Manual
Operating the product
8-Vacation Indicator
This icon illuminated when the Vacation function
is active.
9-High Temperature Error/Warning Indicator
This icon comes on during high temperature
failures should not be hyphenated.
10-Freezer Compartment
Temperature Setting Indicator Indicates the
temperature set for the Freezer Compartment.
11-Eco-Extra Indicator
Eco-Extra Indicator illuminated when the Eco Extra
function is active.
12-Quick Freeze Indicator
This indicator illuminates when the Quick Freezer
function is active.
13-Freezer Set Function
This function allows you to make the freezer com-
partment temperature setting. Press this button to
set the temperature of the freezer compartment to
0, -2, -4, -6, -8, -10 and -12 degrees °F respec-
tively.
14-Quick Freeze Function
Quick Freeze indicator turns on when the Quick
Freeze function is on. To cancel this function press
Quick Freeze button again. Quick Freeze indicator
will turn off and return to its normal settings. If you
do not cancel it, Quick Freeze will cancel itself au-
tomatically after 4 hours or when the freezer com-
partment reaches to the required temperature.
If you want to freeze large amounts of fresh food,
press the Quick Freeze button before putting the
food into the freezer compartment. If you press the
Quick Freeze button repeatedly with short inter-
vals, the electronic circuit protection will be
activated immediately.
This function is not recalled when power restores
after a power failure.
15-Eco-Extra (Special Economic Usage)
Function
Press the Quick Freeze\Eco Extra button for
3 seconds to activate the Eco Extra Function.
Refrigerator will start operating in the most eco-
nomic mode at least 6 hours later and the econo-
mic usage indicator will turn on when the function
is active. Press the Quick Freeze button for 3 se-
conds again to deactivate the Eco Extra Function.
16-Alarm Off
When the refrigerator door is opened for 2 minu-
tes or when there a sensor failure, a sound alarm
turns on. Alarm can be turned off by pressing
“Alarm Off” button.
Sensor failure alarm will not sound until power
failure. If you close the door and then open again
“Door open alarm” will be activated again after 2
minutes later .
High temperature error can be turned off by
pressing “Alarm Off” button. If the error conditions
continue, the error will be displayed again after
defined time interval.
The product will give an alarm once the water filter
has completed its lifecycle. The alarm will go off
when you press and hold the display off key for 3
seconds.
Loading ...
Loading ...
Loading ...