Loading ...
Loading ...
Loading ...
13
Specifications
Turntable specifications
Type
Belt-drive manual turntable
Motor DC motor
Drive method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable platter POM (polyoxymethylene)
Wow and flutter < 0.08 % WRMS (33 RPM) at 3 kHz
Signal-to-noise ratio > 60 dB
Output levels
“PHONO”
“LINE (MM)”
4.5 mV nominal at 1 kHz, 5 cm/sec
280 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-amp gain (MM)
Phono Pre-amp gain (MC)
36 dB nominal, RIAA equalized
56 dB nominal, RIAA equalized
Tonearm specifications
Type
Static balanced J-shaped tonearm
Effective length 247 mm
Overhang 17 mm
Maximum tracking error angle Less than 2.5°
Stylus pressure adjustment
range
0 to 2.5 g
Applicable cartridge weight
range (including headshell)
15 to 20 g
Cartridge and headshell specifications
Cartridge Model VM520EB
Cartridge Type VM Dual Magnet
Recommended load
impedance
47,000 ohms
Output voltage 4.5 mV (mV at 1 kHz, 5 cm/sec)
Stylus 0.3 × 0.7 mil bonded elliptical stylus
Cantilever Aluminum pipe
Tracking force range 1.8 to 2.2 g (standard 2.0 g)
Cartridge weight 6.4 g
Headshell model AT-HS10
Headshell weight 10 g (excluding lead wires)
Headshell overhang
adjustment
± 5 mm
General specifications
Power supply requirements 100 to 240 V, 50/60 Hz, 0.6 A Max.
Power consumption 5.5 W
AC Adapter 12 V, 2 A
Dimensions 450 mm (17.72") × 352 mm (13.86")
× 157 mm (6.18")
(W × D × H)
Weight 8.3 kg (18.30 lbs) (without dust
cover)
Accessories included Dust cover, Platter, Drive belt,
Counterweight, Headshell (AT-HS10)
with VM stereo cartridge (VM520EB),
45-RPM adapter, RCA audio cable
(Approx. 1.4 m (4.6')), AC adapter
(Approx. 1.3 m (4.3')) (AD-SE1220KZ)
Replacement stylus (sold
separately)
VMN20EB
Replacement headshell (sold
separately)
AT-HS10
Replacement belt (sold
separately)
AT-LP7 exclusive belt
Specifications are subject to change without notice due to
improvements.
Loading ...
Loading ...
Loading ...