Loading ...
Loading ...
Switch on / off the headset
1)To switch on the headset
Press and hold the MFB button (1) for 2 seconds and the LED (5) flashes in red.
Afterwards the LED flashes in red and blue alternatively, the headset enters into
pairing mode automatically.
2)To switch off the headset
Press and hold the MFB button (1) for 6 seconds until the LED flashes red and a
“beep” sound is heard.
Pairing the headset with your phone
1) Ensure the headset is turned off.
2) Place the headset and the mobile phone where they are easily viewable and no
more than one meter apart.
3) Press and hold the MFB for 3 seconds until the LED quick flashes blue and red
alternatively, and a "beep” is heard.
3) Activate your mobile phones’ Bluetooth function; please refer to your mobile
phone user guide for details.
4) Set the mobile phone to search for Bluetooth devices within range and select
“ PHBT6” from the list of devices shown.
5) Enter pass code "0000" and press "OK" to pair your headset
with mobile phone, when the pairing is completed, the LED will
flash blue regularly and the headset in standby mode.
6) Go back to your mobile phone’s main menu.
Note:
1) The pairing mode will last for 5 minutes. If the pairing failed, the headset will
automatically turn off.
2) After the initial connection, each time the headset is turned on it will seek the last
device it was connected to. If the device is turned on and in range, it will connect
automatically.
3) The battery meter will display automatically at the status bar of iPhone, iPad and
iPod once it is connected successfully. The headset will automatically power off if no
paired device is in range for 5 minutes.
Loading ...
Loading ...
Loading ...