Loading ...
Loading ...
Loading ...
62
63
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
While pushing down on the Child Restraint (5a) pull the vehicle shoulder
belt (5b) to tighten vehicle lap belt.
While still pulling the shoulder belt tight, slide the vehicle shoulder belt
into the Lock-Off. Always use the Lock-Off on the opposite side of the
vehicle belt buckle.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
5
6
INSTALL USING LAP-SHOULDER BELT
7
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
1
2
3
4
5a
5b
6
7
Loading ...
Loading ...
Loading ...