Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
38
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
“Warning and Safety instructions” at
the beginning of this booklet.
Installation recommendations
- To achieve optimum vapour
extraction, the rangehood must be
positioned centrally over the cooktop,
not to the side.
- The cooktop should be no wider than
the rangehood and, if possible, it
should be narrower, especially for
safety distances greater than
750mm.
- The installation area must be easily
accessible. The rangehood should be
easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the rangehood.
Installation materials
1 exhaust connection
for exhaust ducting 150mm.
1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode).
4mounting plates
for installation in a 600mm wide
cabinet
2 brackets
for installation in a 900mm wide cabinet
(only for 896mm wide appliances)
2 spring clips
for installation in a 900mm wide cabinet
(only for 896mm wide appliances)
1 spacer strip
for concealing the gap between the
rear of the appliance and the wall
2 depth stops
to limit how far the deflector plate can
be pushed in
Loading ...
Loading ...
Loading ...