Loading ...
Loading ...
Loading ...
Using Watch Operations to
Adjust the Time Setting
If, for some reason, you cannot use time signal
reception to adjust the current time setting,
you can adjust date, time, and Home City
settings manually using watch button
operations.
●
Setting a Home City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
configure a summer time setting.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Use (B) and (D) to change the Home City
setting.
●
Holding down (B) or (D) scrolls through
settings at high speed.
●
For details refer to the information
below.
l
City Table
4. Press (C).
5. Use (D) to select a summer time setting.
Each press of (D) cycles through available
settings in the sequence shown below.
●
[AUTO]
The watch switches between standard
time and summer time automatically.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
6. Press (A) to complete the setting
operation.
Note
●
The [AUTO] summer time setting is
valid only when the watch’s Home City
is in an area where a time signal can be
received.
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
Setting the Time/Date
You can use the procedure below to adjust the
time and date settings when using the watch
where signal reception is not possible.
Important!
●
If you are using the watch in an area
where signal receive operations are
possible, time and date settings using
the time signal is recommended.
●
Configure the Home Time setting
before changing the current time and
date settings.
l
Setting a Home City
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3. Keep pressing (C) until the setting you
want to change is flashing.
●
Each press of (C) moves the flashing to
the next setting in the sequence shown
below.
Summer time
Home City
Ye a r
Day
Month
Minutes
Hours
Seconds
Date display format
12/24-hour timekeeping
Day of the week language
Auto Receive
Operation tone enable/disable
Illumination duration
Power Saving
Watch Operation Guide 3495
11
Loading ...
Loading ...
Loading ...