Loading ...
Loading ...
3
Operation Guide 5088
To select a mode
Press C to cycle between the modes as shown below. The n
Right Dial Hand
indicates the currently selected mode.
6
Timekeeping Mode Stopwatch Mode
Alarm Mode World Time Mode
The hand indicates
the day of the week
(SU, MO, TU, WE, TH,
FR, SA).
The hand points to 0.
The hand points to AL. The hand points to
STD or DST.
C
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the
Timekeeping Mode from any other mode, hold down C for about two seconds.
Hand Functions
z Hour Hand
x Second Hand
c Minute Hand
v Upper Left Dial Hand: Indicates the current hour in
the Home City time in 24-hour
format.
b Lower Left Dial Hands:
Indicate the current time in the World Time City in
24-hour format.
n Right Dial Hand: Indicates the day of the week.
m Day
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds
to Newfoundland.
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the x
Second Hand goes through the
following sequence.
Moves to YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
This indicates the city code setting mode.
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
For details about city codes, see the “City Code
Table”.
To change the Home City setting, press 2. D to move the
x
Second Hand clockwise.
Keep pressing D until the x Second Hand is pointing
at the city code you want to select as your Home City.
Each time you select a city code, the z
Hour Hand,
c
Minute Hand, v Upper Left Dial Hand and m Day
move to the current time and date for that city code.
Do not perform the next operation until these hands
stop moving.
Press 3. B to toggle the time for the currently selected city code between STD
(standard time)/DST (daylight saving time).
In the city code setting mode, the n Right Dial Hand indicates the current
daylight saving time setting as STD (standard time) or DST (daylight saving
time).
Note that you cannot switch between STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After all the settings are the way you want, press 4. A to return to the Timekeeping
Mode.
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings”.1.
Each time you select a city code, the z Hour Hand, c Minute Hand, and
v
Upper Left Dial Hand move to the current time for that city code. Do not
perform the next operation until these hands stop moving.
Press 2. B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
In the city code setting mode, the v
Right Dial Hand indicates the current
daylight saving time setting as STD (standard time) or DST (daylight saving
time).
Note that you cannot switch between STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After the setting is the way you want, press 3. A to return to the Timekeeping Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Selecting some city codes makes it possible for the watch to receive the time
calibration signal for the corresponding area automatically.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The *
reference point for UTC is Greenwich, England.
B +@
* 6> 5
@
B +
@
6> 5
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the x
Second Hand goes through the
following sequence.
Moves to YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
At this time, the n
Right Dial Hand will indicate the
Home City’s current daylight saving time setting (STD
or DST).
Change the Home City and daylight saving time (DST) 2.
settings, if you want.
For details about these settings, see steps 2 and 3
under “To confi gure Home City settings”.
In the following steps, each press of C cycles
between settings as shown below.
Home city/DST Hour/Minute
Year
(tens)
Day Month
Year
(ones)
Press 3. C.
The watch will beep, and the x
Second Hand and n Right Dial Hand will move
to their 12 o’clock positions. This is the time setting mode.
Use 4. D (+) and B (–) to change the time (hour and minute) setting.
Each press of either button will move the hands ( z
Hour Hand and c Minute
Hand) one minute.
Holding down D or B will start high-speed z
Hour Hand and c Minute Hand
movement in the applicable direction. To stop high-speed hand movement,
press any button.
The v
Upper Left Dial Hand and z Hour Hand move in sync with each other.
When setting the time, make sure that the v Upper Left Dial Hand indicates the
proper a.m./p.m. hour.
If you want to change the date setting at this time, press C and perform the
procedure starting from step 3 under “To change the current date setting
manually”.
After the time setting is the way you want, press 5. A to return to the Timekeeping
Mode.
This will cause the x Second Hand to move automatically to 12 o’clock and
resume movement from there.
To change the current date setting manually
@
00
50
10
40
30
90
60
80
70
Setting the year (tens digit)
20
In the Timekeeping Mode, keep 1. A depressed (for
about fi ve seconds) as the x
Second Hand goes
through the following sequence.
Moves to YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then
to READY (R), and then to the city code of the
currently selected Home City.
Press 2. C twice.
The watch will beep and change to the year
setting mode.
The year can be set in the range of 2000 to
2099.
Use 3. D to change the tens digit of the year setting.
Each press of D will move the x
Second Hand
and change the tens digit of the year setting.
After the tens digit of the year setting is the way 4.
you want, press C.
The watch will beep and change to the ones
digit of the year setting mode.
Use 5. D to move the x
Second Hand to the ones
digit of the year setting you want.
Each press of D will move the x
Second Hand
and change the ones digit of the year setting.
After the year setting is the way you want, press 6.
C.
The watch will beep and change to the month
setting mode.
Use 7. D to move the x
Second Hand to the
month setting you want.
After the month setting is the way you want, 8.
press C.
The watch will beep and change to the day
setting mode.
@ 6
6>
B +@
Setting the year (ones digit)
@
01
2
3
4
657
9
8
Setting the month
@
Dec
Jan
Feb
Mar
Apr
Jun
May
Nov
Jul
Oct
Sep
Aug
Loading ...
Loading ...
Loading ...