Loading ...
Loading ...
Loading ...
9
FAUCET CAP
BACKSPLASH INSTALLATION (OPTIONAL)
Install the backsplash to the serving cart as shown below:
BACK SPLASH
BACK OF UNIT
ASSEMBLING THE SINK COVER
1. Place the handle over the holes on the cap, then using a screwdriver, screw in the provided
handle to affix the handle onto the cap.
WATER FAUCET INSTALLATION AND WATER LINE CONNECTION
1. Remove the covers from the pre-drilled holes atop the sink and place the gasket over the holes.
2. Liberally apply Teflon Tape (not included) to both water inlets.
3. Attach the connecting hose piece to the tap you wish to use to control the flow of water. Apply the
cap to the unused tap.
4. Lower the faucet through the gasket and pre-drilled holes.
5. From the rear of the cart, connect your hose to the faucet. To complete the connection, open the
water valve and let the water run through the hose.
WARNING
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING.
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION.
Loading ...
Loading ...
Loading ...