Loading ...
Loading ...
Loading ...
Theoperationofanylawn
mower can result in foreign
objects thrown intothe
eyes, which can result in
severe eye damage.
Always wear safety glasses or eye
shields while operating your lawn mower
or performing any adjustments or repairs.
We recommend a wide vision safety
mask over spectacles or standard safety
glasses.
HOWTO USEYOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory
for optimum performance. Speed isnot
adjustable.
ENGINE ZONE CONTROL
_.CAUTION: Federal regulations require
an engine control to be installedon this
lawn mower in order to minimize the risk
of blade contact injury.Do not under any
circumstances attempt to defeat the
function ofthe operator control. The blade
turns when the engine is running.
• Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned
behind the lawn mower handle to start
and operate the lawn mower.
DRIVE CONTROL
• Self-propelling is controlled by holding
the operator presence control bar down
to the handle and pushing the drive
control lever forward until it clicks;then
releasing the lever.
• Forward motionwill stop when the
operator presence control bar is
released. To stop forward motion
without stopping engine, release the
operator presence control bar slightly
until the drive control disengages. Hold
operator presence control bar down
against handle to continue mowing
without self-propelling.
• To keep drive control engaged when
turning comers, push down on handle
and liftfront wheels off groundwhile
turning lawn mower.
Operatorpresencecontrolbar
Drive
control
TO ADJUST cu'n'ING HEIGHT
Raise wheels for low cut and lower
wheels for high cut, adjust cuttingheight
to suit your requirements, Medium
position is bestfor most lawns.
• To change cutting height, squeeze
adjuster lever toward wheel. Move
wheel up or down to suit your require-
ments. Be sure all wheels are in the
same setting.
NOTE: Adjuster is properly positioned
when plate tab inserts intohole in lever.
Also, 9-position adjusters (if so equipped)
allow lever to be positioned between the
plate tabs.
"---'_"_L°werWheels for High Cut_
b
Raise Wheels for Low Cut Lever
TO CONVERT MOWER
Yourlawn mower was shippedready to be
usedasa mulcher. Toconverttobagging:
REARBAGGING
• Liftreardour ofthe lawn mowerand place
grasscatcherframehooksontothe
dcor pivotpins.
• To convertto mulchingoperal_on,remove
grasscatcherand closerear door.
ACAUTION: Do not runyour lawn mower
without clipping deflector or approved
grass catcher in place. Never attempt to
operate the lawn mower with the rear
door removed or prepped open.
Pivot " Rear Grass
catcher
_- handle
Catcher frame hook
To engage Ddve control
ddve control disengaged 7
Loading ...
Loading ...
Loading ...