Loading ...
Loading ...
Loading ...
10
UNDER CUPBOARD RANGEHOOD INSTALLATION
Before beginning installation, to better handle the hood,
catcher. The oil catcher is held by 2 thumb screws. When
to the screw mounting holes.
Attach the black air outlet adapter over the hood. Tighten
The ducting must be attached to the rangehood before
installing the hood into the cupboard. FIG
1.
Slide the 150 mm diameter ducting over the sleeve.
with duct tape.
-
ing in the top of the cupboard and ceiling.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
To motor unit connection
FIG 1
Check the position of the power outlet and consider where the power cable will run. A hole might
have to be made in the wall unit to accommodate the plug and cable
of the spring steel to match the thickness of the mounting panel. The hood can be slid into the
pre drilled holes.
Secure the unit by using 6 long mounting screws, 3 into each side - FIG
2.
Oil Catcher
650 mm
Loading ...
Loading ...
Loading ...