Loading ...
Loading ...
Loading ...
Ⅰ.PreparationbeforeUsing:
Ⅱ.Settemperaturerequired
Intelligent temperature controller operation method
Check the connection between power plug and electrical socket of
electrical cabinet.Be sure to operate with safe ground wire!!!
Heat press element must be securely plugged into the machine before you
switch the machine on.Plug your electrical cord into the machine.Plug
electrical socket into wall plug.Turn the power on by flipping the On/Off
Switch on.( Nominal voltage:220V, Max.input power:1250W )
Set the temperature and time according to the table below and get the
specific corresponding temperature and timing setting.(Temperature is
measured in Degrees Fahrenheit.)
Press the “MODE”button ONCE,see the “set light” turning red.Then press the
“plus/minus key” to set the initial heating temperature.
1.
2.
Press
Object
Mugs
Tiles
Metalboard
Plate
230
230
230
230
330
330
300
355
40
40
40
150
Initial
Temperature
Highest
Temperature
ProperHeating
Time(s)
Sublimation paper:30-50s
T-shirt Paper:10-20s
T-shirt
230 355
A.InitialTemperatureSetting(Range:200-450
℉
)
Press the “MODE” button for THE SECOND TIME;see the “temperature light”
turning red.Then press the “plus or minus key” to set the highest heating temperature.
B.HighestTemperatureSetting(Range:200-450
℉
)
Press the “MODE” button for THE THIRD TIME;see the”time light” turning red.
Then press the “plus or minus key” to set the proper heating time.
C.ProperHeatingTimeSetting(Range:0-999sec.)
- 6 -
Loading ...
Loading ...
Loading ...