Loading ...
Loading ...
Loading ...
13OPERATING INSTRUCTIONS
DIMMING DISPLAY:
After 60 seconds of inactivity, the display and indicator lights will turn o. And the Air quality
light will reduce its brightness. Press any button on the control panel or remote control, and
the display will illuminate. Please note that if the unit is in Eco mode and the set temperature
has been reached, the unit may appear o. However, the unit is on and will continue to sample
the air temperature every 10 minutes. To confirm, press any button on the control panel or
remote control.
SLEEP FEATURE:
The display will show SL for 3 seconds. Then,
t
he display, indicator lights, and the air
quality light will turn o.
In this mode, the unit will automatically select
the Auto fan speed, and the selected
temperature will increase by 2 °F 30 minutes
after sleep mode is selected. The temperature
will then increase by another 2 °F after an
additional 30 minutes. This new temperature will
be maintained for 7 hours before it returns to the
originally selected temperature. This ends the
"Sleep" mode and the unit will continue to
operate as originally programmed. The "Sleep"
mode program can be cancelled at any time
during operation by pressing the "Sleep"
button, “Fan” or “Mode” button.
YOU WILL SEE:
DO THIS:
PRESS SLEEP
BUTTON
PUREAIR
TM
FILTER (sold separately):
PUREAIR
TM
FILTER INDICATOR:
RESET PUREAIR
TM
FILTER LIGHT:
This unit can be used with PureAir
TM
Filters,
which can be purchased by scanning the QR
code behind the air inlet grille, by visiting
Frigidaire.com, or by calling Frigidaire Customer
Service Center 1-800-944-9044(US) /
1-800-265-8352 (Canada).
Note: The PureAir
TM
Filter indicator will glow
white, if a PureAir
TM
filter is installed.
After 1440 hours of operation the PureAir
TM
Filter indicator will turn red. To reset, replace
with new PureAir
TM
Filter, then hold the "Sleep"
button 5 for seconds.
Red light
DO THIS:
HOLD SLEEP BUTTON
5 SECONDS
White light
Loading ...
Loading ...
Loading ...