Loading ...
wall cup/top of stairs
installation (continued):
wall cup/top of stairs
installation (continued):
wall cup/top of stairs
installation (continued):
Colors and styles may vary.
MADE IN CHINA.
D0000000853 1/21
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
401-671-6551
© 2020 Summer Infant, Inc.
Summer Infant stands behind all of its products.
If you are not completely satisfied or have any
questions, please contact our Consumer Relations
Team at 401-671-6551 or
www.summerinfant.com/contact
• Regularly check tension bolts to make sure the gate is securely
in place.
• Do not use the gate if any components are damaged or
missing.
• Surface-clean with a damp cloth or sponge using mild
detergent and warm water.
gate stopper
removing fabric seat:removing fabric seat:removing fabric seat:attach to adult chair (cont.):
13
14
15
9
10
11
12
testing the installation:
operation: troubleshooting:
If the gate does not close properly:
1. Gate is not properly aligned in the door frame.
Solution: To adjust the gate’s alignment, loosen all four
tension bolts and reposition gate so that it matches the
“correct” image. Re-tighten tension nuts.
2. Pressure of tension bolts needs adjusting.
Solution: Loosen or tighten the upper tension nuts.
Ensure the upper latch handle always remains below the
release button. Ensure the upper latch handle engages
securely when the gate swings closed and that it releases
properly when the release button is pressed.
correct!
5
1
st
Remove backing
from one side of
each adhesive
mounting pad.
2
nd
Attach one pad to the
back of each wall cup.
x 4
G
x 4
F
peel!
peel!
3
rd
Remove backing.
6
Align the wall
cups so the
center hole is
placed directly
over the wall
anchor. Stick
the wall cups to
the wall.
press!
press!
press!
press!
Make sure all
wall cups are
facing up.
!
7
x 4
D
x4
Screw wall
cups into wall.
8
NEVER open the gate door over
the stairs.
IMPORTANT
x 4
Repeat "installation" steps on page 5. The 4
tension bolts will rest within each wall cup.
Tighten all 4 tension
nuts with the
provided wrench.
9
H
FINISHED!
Note: This gate includes a gate stopper which
prevents the gate door from swinging open in
one direction when used at the top of the stairs.
!
When mounting this product at the top of
the stairs, locate the door stopper that is
on the opposite side of the stairs.
maintenance:
1
st
2
nd
Close the gate.
Make sure the upper
and lower latches
lock securely.
Push the gate
and frame to
check stability.
push!
push!
to unlock gate:
First, slide locking tab
back to release.
Second, open door.
incorrect!
x 4
Loading ...
Loading ...