Loading ...
Loading ...
Loading ...
SET UP
1. Open the Lid and remove any packaging contents.
2. Place the Towel Warmer on a dry, level, hard surface.
3. Insert Plug into a standard 120V outlet.
NOTE:
This Towel & Blanket Warmer has a 3-prong grounding plug. To reduce the risk of
electric shock, plug the power cord into a grounded (earthed) electrical outlet
that is easily.
USING THE TOWEL & BLANKET WARMER
The Towel & Blanket Warmer can comfortably warm up two large cotton bath
towels or a personal throw blanket.
1. Insert the power cord into an electrical outlet.
2. Open the LID and place ONLY DRY towel(s) or blanket inside.
NOTE: Placing damp or wet towels inside the towel warmer can damage the
unit and pose serious safety risks.
3. Close the LID.
4. Press the ON/OFF BUTTON. The LED ring will turn red, indicating that the unit
is heating.
5. When the temperature of the INTERIOR SURFACE exceeds 122°F/50°C, the
HOT SURFACE INDICATOR will light up. When lit, the INTERIOR SURFACE of
the Towel Warmer is unsafe to touch.
6. 15 minutes is typically sucient for heating 2 bath towels.
NOTE: The Towel Warmer could reach approximately 266°F/130°C and remain
hot for the duration of the heating cycle.
7. Open LID to remove towel(s) or blanket.
NOTE: To avoid damage to the unit, gently raise the lid when removing items.
8. Press the ON/OFF BUTTON at any time to stop or start the heating cycle.
9. The unit will automatically turn off after 60 minutes.
10. After the heating cycle is complete, the INTERIOR SURFACE of the Towel &
Blanket Warmer will remain dangerous to touch until the HOT SURFACE
INDICATOR turns o.
www.SereneLifeHome.com 7
Loading ...
Loading ...
Loading ...