BV245 OPERATOR’S MANUAL

Loading ...

Installing the Vacuum Bag

1. Set the unit on a flat, level surface.

2. Align the bumps on the vacuum elbow tube with the slots on the

blower outlet (Fig. 9). The flared end of the vacuum elbow tube

should point to the right.

3. Insert the vacuum elbow tube into the blower outlet (Fig. 9).

4. Twist the vacuum elbow tube clockwise until it locks into place

(Fig. 9).

5. Insert the flared end of the vacuum elbow tube approximately 4

inches (10 cm) into the vacuum bag (Fig. 10).

6. Pull the cinch strap to tighten the vacuum bag around the

vacuum elbow tube (Fig. 10).

NOTE: The cinch strap should be tight enough to prevent the

vacuum elbow tube from slipping out of the vacuum bag, but

loose enough for the vacuum bag to have limited movement

along the vacuum elbow tube.

Fig. 8

Upper

Vacuum Tube

Lower

Vacuum Tube

Arrows

Dots

Fig. 9

Bumps

Blower Outlet

Slots

Vacuum

Elbow Tube

Fig. 10

Vacuum Bag

4 inches

(10 cm)

Vacuum

Elbow Tube

Cinch Strap

Cinch Buckle

Loading ...

OPERATOR’S MANUAL - Page 9